Drag/Acceleration The Official 1/4 mile track thread.

[Angel]

2 more weeks until I am finally able to hit the track. April 14th will the day will history will be made. (I am joking everyone).

I just hope that I am able to have the intercooler on the car, otherwise it will be a bummer. At least I will use launch control this time and map 3.

We will see where that takes me. Anyone wants to predict what will my best time be?

 

[Tonkabob]

2 more weeks until I am finally able to hit the track. April 14th will the day will history will be made. (I am joking everyone).

I just hope that I am able to have the intercooler on the car, otherwise it will be a bummer. At least I will use launch control this time and map 3.

We will see where that takes me. Anyone wants to predict what will my best time be?

What is your mod list again?
And why is your FMIC off the car? Did you switch brands?
Also elevation and April temps so we can make a good guess....

 

[Angel]

What is your mod list again?
And why is your FMIC off the car? Did you switch brands?
Also elevation and April temps so we can make a good guess....

Mods will be AP intakes, Tork OCC, SSR downpipes, SSR muffler deletes and JB4 with fuel wires on Map 3(E30 mix). I sold my Turbo XS BOV and UP intercooler.

I am planning on having the Wagner intercooler by then but not sure if it will happen by April 14th.

 

[DaBears4Lyfe]

Your not a good candidate for running the list, a lot of people have blocked you and wont be able to see the list. Myself included. Turning block back on now.

If you wanted to run the list you should have started it. Angel waited over a day and no one stepped up. I think hes more than capable to handle this 1/4 mile time list, especially since hes not going to allow corvettes to be on the list

 

[Get Stung]

If you wanted to run the list you should have started it. Angel waited over a day and no one stepped up. I think hes more than capable to handle this 1/4 mile time list, especially since hes not going to allow corvettes to be on the list

I have no desire as I've stated before. many have blocked him that's why hes not qualified.
They have done so for good reasons. If you like I will go over them again with you in a pm.

 

[DaBears4Lyfe]

I have no desire as I've stated before. many have blocked him that's why hes not qualified.
They have done so for good reasons. If you like I will go over them again with you in a pm.

Then someone else should have done it or they can unblock when they want to see the times. Since no admin/Moderator wants to handle this then we are faced with allowing a community member to take care of it. Some may not like who it is, but like i said they could have stepped up. No one wants to do this lol.

 

[Angel]

I have no desire as I've stated before. many have blocked him that's why hes not qualified.
They have done so for good reasons. If you like I will go over them again with you in a pm.

Look I am not trying to start anything on this thread. I have moved on from the past. Please just PM whoever you want with your issues man. There is also a 1800 number for those kind of things that offer professional help.

Lets stay on topic for this thread.

There is no need to keep this up. If you don't like it then don't read the thread man, otherwise just do whatever makes you sleep better at night.

Please lets not go back and forth and destroy this thread.

 

[Tonkabob]

Mods will be AP intakes, Tork OCC, SSR downpipes, SSR muffler deletes and JB4 with fuel wires on Map 3(E30 mix). I sold my Turbo XS BOV and UP intercooler.

I am planning on having the Wagner intercooler by then but not sure if it will happen by April 14th.

My vote is 12.2s. Low 12.2s with FMIC, maybe high 12.1s. Without FMIC mid to high 12.2s.

 

[DaBears4Lyfe]

Agreed. Angel is running the list as he is the only one who wanted to restart it and take care of the times if you have issues talk to mods about it. Lets carry on.

Angel, can you go the 13th? If you can then Rick and others will come with us. I dont think I want to run both days.

 

[brancky3]

Mods will be AP intakes, Tork OCC, SSR downpipes, SSR muffler deletes and JB4 with fuel wires on Map 3(E30 mix). I sold my Turbo XS BOV and UP intercooler.

I am planning on having the Wagner intercooler by then but not sure if it will happen by April 14th.

Why only map 3? Map 5 was designed for E30

 

[DaBears4Lyfe]

Why only map 3? Map 5 was designed for E30

I actually have never ran a map 5 pull. Only 0,1,2,3,4,8. I think both 3 and 5 are for higher octane gas (E30, Octane Booster)

 

[Angel]

Agreed. Angel is running the list as he is the only one who wanted to restart it and take care of the times if you have issues talk to mods about it. Lets carry on.

Angel, can you go the 13th? If you can then Rick and others will come with us. I dont think I want to run both days.

Let me check my schedule and talk to the boss lol aka my wife. We should be able to do Saturday, the only thing with Saturday there is a competition with test and tune. So that means it will be more people and we will get less runs. On Sunday its just strictly test and tune and no other events.

But yeah the more people the better. I will let you know, let me talk to the boss tonight.

 

[brancky3]

If the track is pretty empty you should totally test all maps. Start with map 4 (lol) then stock map 0, then the rest. It would be super interesting to know the difference in trap speeds

 

[DaBears4Lyfe]

If the track is pretty empty you should totally test all maps. Start with map 4 (lol) then stock map 0, then the rest. It would be super interesting to know the difference in trap speeds

lol map 4 to let everyone think i have the base stinger.

 

[Angel]

Why only map 3? Map 5 was designed for E30

Good question lol. I just realized I could run Map 5 but I am scared lol. I don't know another way to put it.

 

[Angel]

If the track is pretty empty you should totally test all maps. Start with map 4 (lol) then stock map 0, then the rest. It would be super interesting to know the difference in trap speeds

The track is never empty, maybe this Sunday it will since its only for test and tune and other events. A lot of people are still getting their car ready too.

I will start on Map 3 and then I will see if I convince myself to do Map 5. I will try to do runs on Map 1 and 2 as well if I am able too.

 

[brancky3]

Good question lol. I just realized I could run Map 5 but I am scared lol. I don't know another way to put it.

A lot of JB4 users daily drive map 5, there won't be any issues as long as you actually have E30 (unless your IATs are super high maybe). Check the virtual ethanol sensor in the app (add to your gauge homescreen) and it will tell you the estimated ethanol percentage.

lol map 4 to let everyone think i have the base stinger.

lol exactly. You run a 15, everyone laughs at you. You turn it to stock and run a 13, everyone raises their eyebrows. You turn it to map 5 and crank out a very low 12, everyone is jealous

 

[Angel]

My vote is 12.2s. Low 12.2s with FMIC, maybe high 12.1s. Without FMIC mid to high 12.2s.

I will take a 12.2. Lets hope you are correct.

I was hoping with the intercooler I could get to the 11's. But its a long shot.

 

[Angel]

A lot of JB4 users daily drive map 5, there won't be any issues as long as you actually have E30 (unless your IATs are super high maybe). Check the virtual ethanol sensor in the app (add to your gauge homescreen) and it will tell you the estimated ethanol percentage.


lol exactly. You run a 15, everyone laughs at you. You turn it to stock and run a 13, everyone raises their eyebrows. You turn it to map 5 and crank out a very low 12, everyone is jealous

Is there really a virtual ethanol sensor on the JB4? is it accurate? Where do you see that at I never seen it. This is great if it does.

 

[brancky3]

Is there really a virtual ethanol sensor on the JB4? is it accurate? Where do you see that at I never seen it. This is great if it does.

It's automatically added to your logs, but you can also customize your display (long press on a gauge, select 'E85' parameter)

Also yes, pretty accurate.