3.3TT AVAILABLE NOW... SSR PERFORMANCE Power Pack 3 Development!

[Angel]

Thank you very much!



Working on it currently! The crazy interest in the downpipes and exhaust has slowed us down a little bit, we are focusing on getting that stuff all done and shipped out towards the end of this month. You will hear about it eventually though!



Working on that as well. Same reason as above!



Nope. Not the secondary. The SSR Downpipes cause no CEL. Your car will only run better and stronger!



Thank you! Those gains were with only secondary cats removed. Not primary. I'm sure there is a lot more power left if primary's were also unrestricted.



Thank you for your order!



Very simple install. Should take no longer than an hour or so.



Refer to my answer above



Our downpipes will come with a custom bracket plate that will also allow the same downpipe to fit the AWD version.



They will 100% fit the AWD version as well. We will be providing a custom bracket plate to make up for the difference in transmission brace placement on the AWD version. Working on this now!



No worries It will fit!



It does Please read above for explanation.



Correct. We have accounted for it



That is correct. It has been accounted for using a custom bracket plate that we will be including for all orders. Adding in a drop down on the website so that RWD and AWD can be specified for all future orders so that we know whether it is necessary to include or not to include the plate based on AWD or RWD.



Sorry for the late reply. Came back to a slur of replied about RWD vs AWD after the weekend hahaha. Don't worry though, you guys are all covered Read my replies above.

This is great News SSR !!! I hope you get fitment 100% right on the AWD. Please follow the correct procedure and actually test fit on AWD Stinger and make sure fitment is correct....Do not halfway design a bracket just to make it fit...I personally dont care if I have to wait longer for the product. I just want to make fitment to be perfect and that there are no exhaust leaks or bad fitment or any rattling because bracket is not design properly..... please get it right and take your time as there are many AWD Stingers ordering these downpipes !!! Thank for you awareness to this issue and response !!!

 

[WildBill]

They just had an AWD Stinger driver post that they were at the shop for fitment a couple of hours ago.
They are doing it right.

 

[SKStinger]

Thanks for clarifying the fitment for AWD! Excited to get mine!

 

[Angel]

They just had an AWD Stinger driver post that they were at the shop for fitment a couple of hours ago.
They are doing it right.

SSR performance customer service is amazing...Every time I called SSR they showed nothing but respect to my concerns and answers to my questions. I just want them to make sure that I am ok with a longer lead time if neccesary, I just want them to get it right and I am sure they will.

 

[Skraight]

Is this the same SSR that used to sell plastidip pigments? Just now made the connection.. I still have a bunch from years ago.

 

[SSR Performance]

Now let's let them get to work on building these things!

Oh trust me... we're hard at work over here

This is great News SSR !!! I hope you get fitment 100% right on the AWD. Please follow the correct procedure and actually test fit on AWD Stinger and make sure fitment is correct....Do not halfway design a bracket just to make it fit...I personally dont care if I have to wait longer for the product. I just want to make fitment to be perfect and that there are no exhaust leaks or bad fitment or any rattling because bracket is not design properly..... please get it right and take your time as there are many AWD Stingers ordering these downpipes !!! Thank for you awareness to this issue and response !!!

Anything that we release will work 100% as intended to. This wouldn't be the first time we have had to create a custom plate to attach a bracket. We have done the same on our Porsche applications with zero concern or negative feedback. With that said, I promise you, the product will fit as intended over and over and over forever. This is why we are so confident and offer our lifetime warranty on all products that we fabricate in house. Thank you very much for your input. I truly appreciate it. You guys are awesome!

They just had an AWD Stinger driver post that they were at the shop for fitment a couple of hours ago.
They are doing it right.

That's right! Got her in and taken a look at. Going to make it perfect for you guys Nothing but the best!!

Thanks for clarifying the fitment for AWD! Excited to get mine!

So happy to hear that! Can't wait to get them shipping!

SSR performance customer service is amazing...Every time I called SSR they showed nothing but respect to my concerns and answers to my questions. I just want them to make sure that I am ok with a longer lead time if neccesary, I just want them to get it right and I am sure they will.

You are awesome! Thank you so much for the kind words. We are in it for you guys. When you guys receive your products, all I want to see is happy faces and some sick exhaust note videos on YouTube! Thank you very much!

Is this the same SSR that used to sell plastidip pigments? Just now made the connection.. I still have a bunch from years ago.

Probably! Hahaha. You've then known us from our EARLYYYY days hahaha. It was probably I who sold them to you


Shah @ SSR Performance

 

[Beejumz]

Please make an intercooler after the intake! Nobody has done one right so far.

 

[NYdito]

Oh trust me... we're hard at work over here

Anything that we release will work 100% as intended to. This wouldn't be the first time we have had to create a custom plate to attach a bracket. We have done the same on our Porsche applications with zero concern or negative feedback. With that said, I promise you, the product will fit as intended over and over and over forever. This is why we are so confident and offer our lifetime warranty on all products that we fabricate in house. Thank you very much for your input. I truly appreciate it. You guys are awesome!



That's right! Got her in and taken a look at. Going to make it perfect for you guys Nothing but the best!!



So happy to hear that! Can't wait to get them shipping!



You are awesome! Thank you so much for the kind words. We are in it for you guys. When you guys receive your products, all I want to see is happy faces and some sick exhaust note videos on YouTube! Thank you very much!



Probably! Hahaha. You've then known us from our EARLYYYY days hahaha. It was probably I who sold them to you


Shah @ SSR Performance

Yessss can’t wait!!

 

[Anarchy99]

Please make an intercooler after the intake! Nobody has done one right so far.

Huh? That’s inaccurate.

 

[jraj7995]

Looks good! I sent through an email request but not reply. How much would you be talking about for shipping to NSW, Australia, 2650?

 

[Beejumz]

Huh? That’s inaccurate.

Maybe I'm just particular. Shouldn't say nobody has made a decent one. Only 2 standout. Jonny tig but its tube and fin, and ultimate performance but it fits crooked and the core is small.

 

[Anarchy99]

Yea I ordered a JT, dude knows his stuff, tube and fin is perfectly fine the technology isn’t what it used to be.

 

[Rango]

Thanks @SSR Performance! Collecting information on how I want to set up my exhaust. Your downpipe is on the top of my list. Following your developments closely.

 

[SSR Performance]

Looks good! I sent through an email request but not reply. How much would you be talking about for shipping to NSW, Australia, 2650?

Hey! Go ahead and shoot us a PM!

Thanks @SSR Performance! Collecting information on how I want to set up my exhaust. Your downpipe is on the top of my list. Following your developments closely.

Awesome! Glad to hear it Would love to take care of you. Will wait for the order to pop up!

Shah @ SSR Performance

 

[NYdito]

Hey! Go ahead and shoot us a PM!



Awesome! Glad to hear it Would love to take care of you. Will wait for the order to pop up!

Shah @ SSR Performance

Any news with intake?

 

[Adamdan]

How did your downpipes sound with stock mufflers? Any rasp under load?

 

[SSR Performance]

Any news with intake?

Still in the works! Trust me as soon as there's any news at all I'll be the first to update here! Haha

How did your downpipes sound with stock mufflers? Any rasp under load?

They sound great! Will be making some sound clips within the next couple days.

Shah @ SSR Performance

 

[DaJackson]

@SSR Performance any update on timeline of shipping the downpipes?

...Yes I’m getting impatient.

 

[Rango]

@SSR Performance. Ordered your downpipes. Looking forward to the sound clips with stock mufflers and my shipping notification and tracking #. Thanks!

 

[SSR Performance]

@SSR Performance any update on timeline of shipping the downpipes?

...Yes I’m getting impatient.

Timeline has not changed! As mentioned when the product was released the downpipes will start shipping out by the end of this month

Possibly sooner

@SSR Performance. Ordered your downpipes. Looking forward to the sound clips with stock mufflers and my shipping notification and tracking #. Thanks!

Awesome! Thank you so much for your order Will be sending all of that as soon as its shipped!


Shah @ SSR Performance