Eibach Sways & Springs

[OliverNuther]

Fair enough. That makes sense.

 

[PxbVic]

Wrong. Maths nil debate your'e in the Aus section now. Been there done that.

Such a child would you like me to call you a whambulance?

 

[AV8R]

Such a child would you like me to call you a whambulance?

The tone of the posts is going south, move on please back to topic. Thanks

 

[PxbVic]

For those following my car on the meets and seen the camber here is a before and after spec sheet from todays alignment. The shop believes the guy who did the springs probably didn't do an alignment. He has since left his practise at Arndell park so i found out. The new owner wanted instructions on how to fit them! Long story short put a line through them.

Looks like your wheel alignment is sorted though so congrats

 

[ShannonC]

Here's the tally so far:

Sways and Springs
@OliverNuther
Sways only
@Ozstung
@Hemz
@FitR6
@PxbVic
@ShannonC

I've spoken with John at Eibach and he told me the next production run for sways is scheduled for the 2nd week of May which should see them landed in Sydney by the end of June. Now, how do we handle this?
John suggests we each make individual contact with him towards end of June so he can work out delivery details, final cost, and take your payment. He said to mention my name (Shannon) and Stinger Forum. His contact details are:
Eibach Suspension Technology
Unit 3, 4 Prosperity Pde
Warriewood NSW
Ph 02 9999 3655
I'll drive over and pick mine up (just an excuse to drive Stinger) so if anyone else in western Sydney wants me to collect theirs I'm happy to do so.

 

[app_master]

Here's the tally so far:

Sways and Springs
@OliverNuther
Sways only
@Ozstung
@Hemz
@FitR6
@PxbVic
@ShannonC

I've spoken with John at Eibach and he told me the next production run for sways is scheduled for the 2nd week of May which should see them landed in Sydney by the end of June. Now, how do we handle this?
John suggests we each make individual contact with him towards end of June so he can work out delivery details, final cost, and take your payment. He said to mention my name (Shannon) and Stinger Forum. His contact details are:
Eibach Suspension Technology
Unit 3, 4 Prosperity Pde
Warriewood NSW
Ph 02 9999 3655
I'll drive over and pick mine up (just an excuse to drive Stinger) so if anyone else in western Sydney wants me to collect theirs I'm happy to do so.

Thanks for the update. Not the news I wanted to hear. John and exchanged emails just 3 days ago saying he would confirm availability by end-of-week. But June seems a long way off.

 

[ShannonC]

I spoke with him this afternoon so perhaps he's had an update from the factory.

 

[Ozstung]

Here's the tally so far:

Sways and Springs
@OliverNuther
Sways only
@Ozstung
@Hemz
@FitR6
@PxbVic
@ShannonC

I've spoken with John at Eibach and he told me the next production run for sways is scheduled for the 2nd week of May which should see them landed in Sydney by the end of June. Now, how do we handle this?
John suggests we each make individual contact with him towards end of June so he can work out delivery details, final cost, and take your payment. He said to mention my name (Shannon) and Stinger Forum. His contact details are:
Eibach Suspension Technology
Unit 3, 4 Prosperity Pde
Warriewood NSW
Ph 02 9999 3655
I'll drive over and pick mine up (just an excuse to drive Stinger) so if anyone else in western Sydney wants me to collect theirs I'm happy to do so.

Thanks @ShannonC . So all ours are ordered and going to be put a side then? When does he require payment? (sorry if iv'e missed this previously posted).

 

[AV8R]

I waited 3 months for mine

 

[Hemz]

Here's the tally so far:

Sways and Springs
@OliverNuther
Sways only
@Ozstung
@Hemz
@FitR6
@PxbVic
@ShannonC

I've spoken with John at Eibach and he told me the next production run for sways is scheduled for the 2nd week of May which should see them landed in Sydney by the end of June. Now, how do we handle this?
John suggests we each make individual contact with him towards end of June so he can work out delivery details, final cost, and take your payment. He said to mention my name (Shannon) and Stinger Forum. His contact details are:
Eibach Suspension Technology
Unit 3, 4 Prosperity Pde
Warriewood NSW
Ph 02 9999 3655
I'll drive over and pick mine up (just an excuse to drive Stinger) so if anyone else in western Sydney wants me to collect theirs I'm happy to do so.

Yes please pick mine up too mate.

 

[OliverNuther]

I’m springing for the sways only now Shannon as I’ve been swayed against the springs.

 

[app_master]

I waited 3 months for mine

...another 3 wont hurt then

I spoke with him this afternoon so perhaps he's had an update from the factory.

...was this a group buy? If so, add me to that list. Sways only. (PS I had already engaged John via emails, but happy to jump on this train)

 

[Ozstung]

I’m springing for the sways only now Shannon as I’ve been swayed against the springs.

Funny thing Ollie i made a special effort on my day off to focus on my Eibach springs especially considering the camber has been adjusted. My thoughts are they are luxurious and give less dip. Couldn't be happier.

Now that some members have had them on a while it might be worth putting out a thread asking members for feed back.

 

[OliverNuther]

Funny thing Ollie i made a special effort on my day off to focus on my Eibach springs especially considering the camber has been adjusted. My thoughts are they are luxurious and give less dip. Couldn't be happier.

Now that some members have had them on a while it might be worth putting out a thread asking members for feed back.

Thanks for the extra info but I think I’ll just stick with the sways. I really only wanted the springs to lower the car; I don’t have any performance issues that I’m trying to correct so it’s purely aesthetics for me. But after reading a few recent posts it seems I might be buying some unintended trouble down the track and I don’t want them that bad. The car is low enough and realistically if I lower it any further my next mod would have to be installing a winch above the drivers side door to help haul my fat arse out of the car.

 

[Ozstung]

Thanks for the extra info but I think I’ll just stick with the sways. I really only wanted the springs to lower the car; I don’t have any performance issues that I’m trying to correct so it’s purely aesthetics for me. But after reading a few recent posts it seems I might be buying some unintended trouble down the track and I don’t want them bad. The car is low enough and realistically if I lower it any further my next mod would have to be installing a winch above the drivers side door to help haul my fat arse out of the car.

Fully understood Ollie, hey don't be to self depreciating theres plenty of others to do it here for you lol.
Ps. Got that rain you sent us finally ta.

 

[PxbVic]

Here's the tally so far:

Sways and Springs
@OliverNuther
Sways only
@Ozstung
@Hemz
@FitR6
@PxbVic
@ShannonC

I've spoken with John at Eibach and he told me the next production run for sways is scheduled for the 2nd week of May which should see them landed in Sydney by the end of June. Now, how do we handle this?
John suggests we each make individual contact with him towards end of June so he can work out delivery details, final cost, and take your payment. He said to mention my name (Shannon) and Stinger Forum. His contact details are:
Eibach Suspension Technology
Unit 3, 4 Prosperity Pde
Warriewood NSW
Ph 02 9999 3655
I'll drive over and pick mine up (just an excuse to drive Stinger) so if anyone else in western Sydney wants me to collect theirs I'm happy to do so.

Cool and the gang, is what it is, I'll call him later on in June, unless there is an update on delivery times, you'll let us know here Shannon?

Paul.

 

[ShannonC]

Thanks @ShannonC . So all ours are ordered and going to be put a side then? When does he require payment? (sorry if iv'e missed this previously posted).

I told him I have confirmed orders for at least six full sets of sways so there shouldn't be a problem with supply. Payment only required prior to shipping or collection end of June.

 

[ShannonC]

Yes please pick mine up too mate.

Will do.

 

[ShannonC]

I’m springing for the sways only now Shannon as I’ve been swayed against the springs.

No problems there.

 

[ShannonC]

..was this a group buy? If so, add me to that list. Sways only. (PS I had already engaged John via emails, but happy to jump on this train)

Not so much a group buy but I did use potential numbers and the forum to negotiate a deal. You are most welcome to get on board as is any other forum member.