Burger Tuning JB4 - 2.0T!

[Blckstinger]

This is way easier then I was making it. Just a new car so was just gun shy? What are y gapping your plugs at?

You going to install today? If you do, please take pics.

 

[KellyD.]

For sure!

 

[Blckstinger]

Sweet man. I hope everything goes smoothly, good luck!

 

[KellyD.]

I'm done! Its way easy man just gotta do it. The diagram kicks ass he sent. Also the other guy explained well as well last night. Everyone that helped thanks!

 

[KellyD.]

Hope that helps.

 

[KellyD.]

Color wires is the one I pointed twice at. The brown ones are just once

 

[KellyD.]

Also re gapped my plugs to .024 until terry hits me up...

 

[KellyD.]

K got the fuel wire done way easy. Use the long wire go straight to the white wire and thats it!!! Here is a pic. Also my dumb ass should have went back to the start of this post on this forum we are on? It has it all but guy this morning with real pics helped alot.

 

[KellyD.]

The screen shot was in this post way up in the front!

 

[KellyD.]

Black stinger. Get yours done holly shit!!! Been driving and logging my maps its day and night with this tuner installed... Glad I did it...

 

[monusa]

Good pic, "bosaad". The pics on the link at the BMS site are for the 3.3 BUT they are essentially in the same position and are the same sensors. Again, i have the 2.0T and the HKS plugs and they were recommended to gap at 0.022. That is where mine have been since day one (about 4 months ago) and the spare set i purchased were gapped to the same measurement. No issues at all with the plugs. BMS didn't have the plugs for the 2.0 which is why i went HKS straight from the big "A"....Amazon. got them in 3 days but they sell out fast!!!!!

 

[KellyD.]

Nice! Terry is going to be getting a hold of me tomorrow I've been talking with Chris today at BMS after I had it up and running. Also waiting on gap tool to press the tab down so I get it perfect when gapping the auto store one or pliers did okay but not perfect, that will be here tomorrow so I can get it to spec the lowest I could get em was .024 Other then that thing runs way good and on map 2 man o man! Wish they came off the lot like that, So much better! Again thanks for your help. I was just gun shy at first. Terry is already gunna do some logging for me. And help out on a few ?s I have with the fuel line and the canbus cable. That Chris couldn't answer.

 

[Blckstinger]

Hope that helps.

Hell yea bro!! Everything is working? congrats!!!! Thank you SO MUCH for the pics.

 

[KellyD.]

Yea everything is working perfectly! Night and day difference. Hope that helps

 

[Blckstinger]

Big time! If I have questions installing do you mind if I message you? Did you route the OBD cable through the gromet by the gas pedal?

 

[KellyD.]

I went the easy way real quick going to run it threw my fire wall tonight or this weekend.

 

[Blckstinger]

I went the easy way real quick going to run it threw my fire wall tonight or this weekend.

What was the real quick way?

 

[KellyD.]

Running across threw the driver side door. There is a video I cant find it? I did that for just a couple days. If you have the time be best to just do it rite the fist time and go threw the fire wall.

 

[Blckstinger]

Running across threw the driver side door. There is a video I cant find it? I did that for just a couple days. If you have the time be best to just do it rite the fist time and go threw the fire wall.

Yea, I will try this. I'm also planning on ordering the fuel wire adapter so I don't have to puncture the stock wiring with the posi-tap

 

[KellyD.]

I just actually finished running it threw the fire wall super easy. Just used a old school metal hanger. Even used my dremal to notch out plastic so wires don't hit nothing when closing the hood. I should of just did this yesterday! Its easy!