3D Printed Snorkel Swap

[Hyperjetta]

Now that I've installed the, the only person that will know you have colored ducts is... YOU!

Unless...

 

[General_Vodka]

Unless...

View attachment 39530

I see you like LEDs.

 

[ItsJustAKia!]

If you still have the blue ones I will buy them now?

 

[Hyperjetta]

I see you like LEDs.

You can't tell from the photo, but I programmed them to fade in and out. Next up is to figure out how to control them over Bluetooth so I can turn them on/off and change their color.

 

[ScottM]

Unless...

Not sure where you live, but in my neck of the woods...blue lights of that sort can be a reason to be pulled over by the "blue lights". Not a good reason, but a reason.

 

[Hyperjetta]

Not sure where you live, but in my neck of the woods...blue lights of that sort can be a reason to be pulled over by the "blue lights". Not a good reason, but a reason.

Can't have blue lights on the road here either, but they're OK to have at the track. What I'm not sure of is if I can use a white LED to illuminate a blue duct.

 

[Hyperjetta]

Now that I have that out of my system I am ready to take orders for a second batch of 10 ducts. After seeing what went into making the first batch I am going to increase the price slightly to $75 plus shipping, but I will now offer them in black, grey, white, blue, red, yellow and purple at no extra cost.

I also made some adjustments to the duct itself. I thickened up the walls and added some support structures to make it more rigid, as well as a second attachment point for added support and piece of mind. Overall just some changes to make these hold up better and have a more finished look.

New version on the left with the separate support piece.


Some closeups of the added supports.


Close up of the support attachment that allows you to connect the duct into the second bolt hole.


Lastly, if you want to add on the LED kit you can purchase it for an additional $75. I hand solder and assemble all the components and strips myself and include nice professional looking cables to connect everything. I can also program it to whatever color, brightness and pattern you'd like. I'll put pictures of mine up this weekend.

If you want to order a set just PM me with the details of what options you'd like.

 

[ItsJustAKia!]

Now that I have that out of my system I am ready to take orders for a second batch of 10 ducts. After seeing what went into making the first batch I am going to increase the price slightly to $75 plus shipping, but I will now offer them in black, grey, white, blue, red, yellow and purple at no extra cost.

I also made some adjustments to the duct itself. I thickened up the walls and added some support structures to make it more rigid, as well as a second attachment point for added support and piece of mind. Overall just some changes to make these hold up better and have a more finished look.

New version on the left with the separate support piece.
View attachment 39534

Some closeups of the added supports.
View attachment 39533 View attachment 39532

Close up of the support attachment that allows you to connect the duct into the second bolt hole.
View attachment 39531

Lastly, if you want to add on the LED kit you can purchase it for an additional $75. I hand solder and assemble all the components and strips myself and include nice professional looking cables to connect everything. I can also program it to whatever color, brightness and pattern you'd like. I'll put pictures of mine up this weekend.

If you want to order a set just PM me with the details of what options you'd like.

 

[ItsJustAKia!]

PM and e-mail sent

 

[Hyperjetta]

Here are some shots of the wiring and the controller for the LEDs.



Kinda hard to see, but that little black box with wires going into it is the controller housing. It's in an easy to access spot in case I want to switch colors.

 

[Whiteybird]

Now that I have that out of my system I am ready to take orders for a second batch of 10 ducts. After seeing what went into making the first batch I am going to increase the price slightly to $75 plus shipping, but I will now offer them in black, grey, white, blue, red, yellow and purple at no extra cost.



If you want to order a set just PM me with the details of what options you'd like.

Sent a message.

 

[jellyman]

Finally got some time to install it. Thanks!

 

[Hyperjetta]

Finally got some time to install it. Thanks!

Wow, that looks great! What did you use to tape it up??

 

[jellyman]

Wow, that looks great! What did you use to tape it up??

Tesa 51026 tape

 

[Gtecko]

Here are some shots of the wiring and the controller for the LEDs.
Kinda hard to see, but that little black box with wires going into it is the controller housing. It's in an easy to access spot in case I want to switch colors.

how does that look when on ?

 

[Stingerman100]

Interested in these!

 

[Hyperjetta]

how does that look when on ?

Here's a short video so you can see the fade:
https://photos.app.goo.gl/MVUY19hqo3kw4rfC7

 

[Hyperjetta]

Interested in these!

Shoot me a pm with your email address and zip code and I'll add you to the list.

 

[Stingerman100]

Shoot me a pm with your email address and zip code and I'll add you to the list.

cant pm yet see if you can start a pm and I'll reply with my email

 

[Hacksaw907]

Just curious, has anyone checked their intakes after a car wash with these on? I'm interested in potentially jumping on the second batch, but I'm concerned that the intakes would be super soaked after a car wash as a result.