What did you do to your Kia Stinger today?

[Snicklefritz]

A friend gave me these today.

 

[BIG-D]

This is a well finished kit... I like it.

 

[undymm]

can I ask my colleagues to look at the buttons for controlling the sunroof and lighting on the ceiling, are they backlit? Thank you very much

 

[Snicklefritz]

can I ask my colleagues to look at the buttons for controlling the sunroof and lighting on the ceiling, are they backlit? Thank you very much

If they are, mine don't work.

 

[OHstinger]

New wheels installed a few weeks ago.

ESR AP6
Front: 19x8.5 +30
Rear: 19x9.5 +35

Lexani LX-Twenty tires
Front: 245/35R19
Rear: 285/30R19

 

[BIG-D]

Gave her a 15000km 18 month old Birthday Wash
Just because...

 

[Deleted member 11966]

what wheels are those? looks fantastic.

Thanks, those are Foose F-150 wheels for mustangs. Got them as a temp set of Marketplace but gave them a good makeover. Ended up keeping them and getting new tires for them.
They look ok but I'd like to go for lighter wheels, as these are pretty heavy (slightly heavier than stock). Here some pics from before, refinishing them and then after.

 

[jinthadell]

New wheels installed a few weeks ago.

ESR AP6
Front: 19x8.5 +30
Rear: 19x9.5 +35

Lexani LX-Twenty tires
Front: 245/35R19
Rear: 285/30R19

View attachment 88023
View attachment 88022

Wheels look sick af!

 

[Snicklefritz]

Thanks, those are Foose F-150 wheels for mustangs. Got them as a temp set of Marketplace but gave them a good makeover. Ended up keeping them and getting new tires for them.
They look ok but I'd like to go for lighter wheels, as these are pretty heavy (slightly heavier than stock). Here some pics from before, refinishing them and then after.

Heavier than stock? Incredible. I had not heard of any wheels for our cars that are heavier than the boat anchors they come with.

 

[Snowwhite]

Thanks, those are Foose F-150 wheels for mustangs. Got them as a temp set of Marketplace but gave them a good makeover. Ended up keeping them and getting new tires for them.
They look ok but I'd like to go for lighter wheels, as these are pretty heavy (slightly heavier than stock). Here some pics from before, refinishing them and then after.

wait. Mustang wheels fit our cars? same centerbore, or did you need centering rings? because that opens up a whole world of options.

 

[Deleted member 11966]

wait. Mustang wheels fit our cars? same centerbore, or did you need centering rings? because that opens up a whole world of options.

Same bolt patterns, but they have LOTS of wheel variations, so some will fit some may not fit in the front. These wheels were initially on a G37 Coupe but specs wise 2015+ Mustangs (if I remember correctly) are 5x114.3 and very similar specs to ours (offsets, widths). All I needed was a hubcentric rings. Do your research on the center bore tho. I don't remember of top of my head but I think theirs is larger then the Stinger/G70/80.

 

[Deleted member 11966]

Heavier than stock? Incredible. I had not heard of any wheels for our cars that are heavier than the boat anchors they come with.

I haven't weighted them side by side but stock rim vs the Foose 150 rim is a bit heavier.

 

[Deviate]

New wheels installed a few weeks ago.

ESR AP6
Front: 19x8.5 +30
Rear: 19x9.5 +35

Lexani LX-Twenty tires
Front: 245/35R19
Rear: 285/30R19

View attachment 88023
View attachment 88022

Oh you know i love the look! Time to bag it!!

 

[undymm]

we Stinger owners know...

 

[BIG-D]

Finally fitted my EXG Carbon Fibre Bonnet from EPR International.

It has a tiny bit of warpage, but i am hoping some time in the sun may sort it out?

 

[Snowwhite]

Finally fitted my EXG Carbon Fibre Bonnet from EPR International.

It has a tiny bit of warpage, but i am hoping some time in the sun may sort it out?




View attachment 88077View attachment 88076View attachment 88078

I would think even just turning it on, going for a quick run, and then leaving it idling for a while will generate more heat than the sun will.

 

[Herb_Remington]

Other than the bit of warping how did it fit? I have a the same hood from Strictly Business and it sits a little high in the middle where the foam rest are. Have not figured out how to get that to sit flush.

Looks good!!

Finally fitted my EXG Carbon Fibre Bonnet from EPR International.

It has a tiny bit of warpage, but i am hoping some time in the sun may sort it out?

 

[BIG-D]

Bolted straight up mate, doesn't come with slots for the rubber stoppers so i glued my own on and removed one bonnet strut, until i can find some low gas ones... it fits awesome now

They are not cheap, you need to shop around

 

[Volfy]

Bolted straight up mate, doesn't come with slots for the rubber stoppers so i glued my own on and removed one bonnet strut, until i can find some low gas ones... it fits awesome now

Gotta be a good bit lighter weight, if it only needs one strut to open/hold. That's a good mod in my book. If only I could convince myself to swing that kinda cash.

 

[Volfy]

Gave her a 15000km 18 month old Birthday Wash
Just because...

Holy crap... that is CLEAN!