OIL CATCH CANS ARE NOW AVAILABLE!!!

[Angel]

these guys aren't even an authorized vendor here. why not support a vendor who sells oil catch cans that supports the community? all they do here is make money and can't chip in like everyone else

Are you talking about Tork Motorsports??

 

[ballistic]

Are you talking about Tork Motorsports??

yea where's their vendor badge? support the vendors who support the site

 

[Angel]

yea where's their vendor badge? support the vendors who support the site

If you read my previous post where I got into a bit of a heated discussion with Tork Motorsports regarding there price increase on there OCC....Dude I been saying that all along and some people seemed to get upset at me....They starter selling there OCC for 125 and the increased them to 199 once the they seen demand was up and of course they claim that its not demand there losing money on them...but hey if i say the truth I am a hater right?? i called them and asked them for a discount and there not even willing to offer any discounts after the price increase...I agree man there to just make money but dont tell them that because they will get offended ......

 

[Angel]

yea where's their vendor badge? support the vendors who support the site

I was going to buy plugs, tune, intakes and 2 OCC but there not willing to give no discount I might just wait and wait for other competitors to come in at a cheaper price....

 

[Angel]

I dont mind supporting companies or people but you need to show love back... there clearly making a lot of money from members here buying there stuff because they post here..... but what do I know....

 

[ballistic]

I was going to buy plugs, tune, intakes and 2 OCC but there not willing to give no discount I might just wait and wait for other competitors to come in at a cheaper price....

theyre not here for any other reason but to earn like any other business. its a shame they can't give a little back to the platform that allows them to earn revenue. its like owning a store in the mall. you pay rent so the owner can keep that mall open and earn revenue himself to make it a feasible business so you can sell your stuff to the people who walk in. it irks me when a vendor sits here selling and pretending he doesn't notice every other vendor actually chipping in

 

[StingerNYC]

yea where's their vendor badge? support the vendors who support the site

Tork is the only one who has done a catch can specific for the stinger, and also the only one that has an install video. They are doing real development for the stinger. I will support them.

 

[Angel]

theyre not here for any other reason but to earn like any other business. its a shame they can't give a little back to the platform that allows them to earn revenue. its like owning a store in the mall. you pay rent so the owner can keep that mall open and earn revenue himself to make it a feasible business so you can sell your stuff to the people who walk in. it irks me when a vendor sits here selling and pretending he doesn't notice every other vendor actually chipping in

You words are gold sir !!! I agree with you that is why i called out.

 

[Angel]

Tork is the only one who has done a catch can specific for the stinger, and also the only one that has an install video. They are doing real development for the stinger. I will support them.

I agree they are making some things so far specific for the Stinger I dont disagree with you, but they are also taking advantage of the community because there the only ones that have it so far...keep that in mind......there charging us an arm and leg for there stuff but remember this post and watch once other places start making developments as well....

 

[Hojae84]

Its for those who do not want to have the factory crankcase breather hose attached to the intake.

I selected this option... @Sales@Tork can you pls advise on what difference this makes vs having breather hose attached like you showed in your video? E.g sound changes ?. Pros cons?

 

[Angel]

There was a company back in the day called SRT (swift racing technologies) that developed one of the first bolt on turbo kits for the Lexus IS 300 which is the 2JZ-GE non turbo....at first they were making a lot money anbd charging pwople an arm and leg and everyone was going to them at the beginning on the IS forum but then other legit companies came in with superior products and a cheaper price and actually supported the is forum and the community with cheaper prices and discounts ....Moral of the story is SRT went out of business about 3 years ago and Driftmotion is still in business to this day and they still support the IS 300....I am telling when companies do that they milk the cow right away and dont think for the future once more people buy stingers...they wont be the only ones developing for the stinger just wacth....

 

[ballistic]

Tork is the only one who has done a catch can specific for the stinger, and also the only one that has an install video. They are doing real development for the stinger. I will support them.

support them all you want its really not your concern and should mean nothing to you whether they support the community or not. ive administered forums before and i just know it's proper etiquette and shows respect for a community when you help support the community that puts money in your pocket. you be you and support whoever you want

 

[Hojae84]

Woah people getting pretty worked up...
I chose their products cos it looked cleanest (hidden under covers and least amount of tubing) and seemed to have a few extra safety features... for me it was worth the extra $ for peace of mind and aesthetics.
I think tork is doing a lot with the stinger and they are doing a lot of r&d. It is early on in stinger existence so maybe give them some time to sell stuff to recoup some cost and time for their work on the stinger. I wouldn't be surprised if they do a group buy in the future or become a paying vendor... it's been less than a year since the stinger has come out - dyno time and testing for a small shop cant cheap. Plus risking blowing the engine and comppnents by pushing the limits
It's simple if it's too expensive, buy something else. If price isn't right and not enough people buy them prices will go lower...
Cant we just get along?

Usually hand made in USA is much pricier than made in China stuff... I really think over time as they recoup some costs from non stop stinger testing a group buy or vendor status may happen

 

[junesrig]

I find all products and videos Tork has put on YouTube and this forum for the Stinger beneficial for all. If you don't want to purchase because a discount is not offered, then go on to another vendor. I see users on here that are not sustaining members, do we tell them information will not be shared with you unless to start supporting? Tork is a business, like any business you have to make a profit to survive and grow.

 

[ballistic]

i clearly understand the need for a business to turn a profit before they start supporting a forum but they're not only selling parts they designed and developed themselves. Select a Category | DamnFastDD.com

 

[Rango]

these guys aren't even an authorized vendor here. why not support a vendor who sells oil catch cans that supports the community? all they do here is make money and can't chip in like everyone else

I have supported many vendors here. Love the Community here! Just like Tork's setup.

 

[STINGER]

I thought this thread was about the OCC

 

[Angel]

It is LOL...Tork wont speak up.....

 

[Sales@Tork]

I selected this option... @Sales@Tork can you pls advise on what difference this makes vs having breather hose attached like you showed in your video? E.g sound changes ?. Pros cons?

Having the breather hose attached will still allow oil into the intake system. By putting a filter on the hose and cap off the port on the intake you eliminate that.

 

[Sales@Tork]

Does this seem like a statement they support the community??? Read quote ??? Let me translate for those that dont fully understand or are blindly defending Tork....I ask for a group buy discount which would benefit everyone...His response that you can read above...in other words what he is trying to say why give us a discount if there the only ones with a specific OCC...when we have to to them if we want a specific ...so in other words you dont have a choice ....Really i dont think they would have taken this approach if there were other specific OCC ...That attitude and way of thinking is what i am pointing out....they have a chance to help us out and work with us but no....why because they know we can can go nowhere else...simple as that....so support them if you want its a free country but i am just stating my opinion...they have a chance to create some customer loyalty but they prefer to take advantage....

You really seem to have an issue with us. It is simply this you dont like us, our products, or our price then do not buy from us. You can go to another vendor and buy an OCC and have it work just fine on your car. hell you can build your own if you really want to. You can thin as you may about why we raised our pricing. The fact is we were LOSING money on our previous price. So by us giving you a discount it benefits everyone besides us. Again if you do not like our prices you do not have to buy them.

I don’t know Tork MilkingSports you tell me ?????

Wow.... So we are on a 5th grade level right now. I guess it is time to end this conversation. Believe as you may at this point. AgaIn YOU DO NOT HAVE TO BUY FROM US.