Lozic ECU + TCU + AWD Tune

[AtomicGTL]

alright, so it works the same way the tork tcu works. I am going to talk to lozic about implementing a potential feature that could benefit pretty much all of us, especially for the ones going to drag strips.

I totally suck on the whole desired rpm launch. Needle goes too fast for my dumb mind.
Too bad my practice came to an hault smh.

And yes do share

 

[G70LEbyAdoom]

I totally suck on the whole desired rpm launch. Needle goes too fast for my dumb mind.
Too bad my practice came to an hault smh.

And yes do share

I dont want to share until I get an answer from lozic, as this would totally eliminate that problem lol

 

[Yves998]

Do you just keep the pedal to the floor all the time? or will it stop building and hold at whatever RPM you desire till you let off the brake?

It will keep climbing until your tires freak out. That’s why I’m asking if you guys use less throttle to build boost and rpm slower to get optimal rpm easier.

 

[AtomicGTL]

It will keep climbing until your tires freak out. That’s why I’m asking if you guys use less throttle to build boost and rpm slower to get optimal rpm easier.

I tried that way. Had worse timings tbh. I think since i wasnt building enough boost. Some may have better luck that way though.

 

[Pearly]

It boosts even quicker at 2200 lol

So for 30,40,50,60 rolls I am above 3,300 so boost is ready. You think 2,200 would still advantage me? I just trying to avoid hitting it in normal driving. I also have the TCU so don’t need if for launching.

 

[G70LEbyAdoom]

It will keep climbing until your tires freak out. That’s why I’m asking if you guys use less throttle to build boost and rpm slower to get optimal rpm easier.

I dont think you can, I believe you need your foot to the floor for them to climb at all.

 

[djerickd]

Also lozic said he purposely tricks the speed. I did not ask why.

is this why we don't get the set speed when we do cruise control?

 

[G70LEbyAdoom]

is this why we don't get the set speed when we do cruise control?

I doubt it as my speed displays just fine in the little cruise speed display in my GT2 and its tricked to hit the higher speed.

 

[Pearly]

is this why we don't get the set speed when we do cruise control?

No this is not why. I had one that showed speed. But yet mph was still wrong in logs. I honestly don’t know why. Maybe it’s the actual ECU part number?

 

[djerickd]

Oh wow

 

[Pearly]

is this why we don't get the set speed when we do cruise control?

Maybe ask him what settings cause some to work and some not to?

 

[Yves998]

No this is not why. I had one that showed speed. But yet mph was still wrong in logs. I honestly don’t know why. Maybe it’s the actual ECU part number?

I would like to guess ECU part# as well. I had 3 versions now. The first one is the pre22 ver with sport+. Car went limp mode once because torque monitor crashed due to drive mode switch. Second one comes with the new file on it but I lost UVO permanently, even delete everything on kia side and reactive a new account, the car will just keep kick me offline.(Lap3 disables it so I was assuming he disabled it too so I’m not even bothered by that). With the third revision the UVO just back online immediately without me even noticing it. Third and first tune I received matches part# while the second is different.

 

[SneakerB]

I have boost ready always on and i took my tork tcu out to and put stock in to check out the launch with just ecu but its only a stock launch 2100 rpm with 0.3 boost had peddal mashed too is there something special im supposed to do? Or is my boost ready not working?

 

[Pearly]

I have boost ready always on and i took my tork tcu out to and put stock in to check out the launch with just ecu but its only a stock launch 2100 rpm with 0.3 boost had peddal mashed too is there something special im supposed to do? Or is my boost ready not working?

Sport Mode Traction off but stability on?

 

[SneakerB]

Sport Mode Traction off but stability on?

Sport mode with everything off traction and stability

 

[SneakerB]

Sport Mode Traction off but stability on?

What dors your rpms go up to on launch?

 

[Pearly]

What dors your rpms go up to on launch?

I have TCU so I have never done it. I just was trying to remember.

 

[HoosierStinger]

I have boost ready always on and i took my tork tcu out to and put stock in to check out the launch with just ecu but its only a stock launch 2100 rpm with 0.3 boost had peddal mashed too is there something special im supposed to do? Or is my boost ready not working?

You will build boost to .5bar and RPM will hold at around 2.2k the same as factory launch control (holding the pedal 100%). So you will launch with boost built but the TCU torque limits remain. That's why the launch isn't as strong as when having the TCU installed.

 

[kylepark1230]

Can someone help me read my graph from my jb4? I’ve installed the Ecu, tcu, and awd if that matters. Thanks guys

 

[SneakerB]

Can someone help me read my graph from my jb4? I’ve installed the Ecu, tcu, and awd if that matters. Thanks guys

you need to disable fuel control wires! and none of those are good enough runs to say whether its running good or not! do a third to fourth gear pull wide open throttle and why are you running map 6? do you have wmi?