3.3TT AVAILABLE NOW... SSR PERFORMANCE Power Pack 3 Development!

[WildBill]

Interested in seeing your intake and knowing if there is annoying exhaust drone with your axle back.

Right now I'm looking hard at Johnny Tig's intake. They have added ducting to bring in more fresh air from the grill and have done a seemingly good job of routing the piping to the rear so they can add huge air filters. (Just not sure if all of the twists and turns in the pipe will negate the increased filter surface area)

Not sure if there is a way to add an EVC cutout at the axle back flange so you can utilize the stock muflers... Would have to modify the pipe to the muffler to shorten it up I suppose.

 

[DaBears4Lyfe]

Well, there is one EVC from Jun BL that is about $2000 because of the $400 to ship it from Korea. Jun is very well known for high quality exhaust systems. So maybe a good price point would be $1500ish. Lots of people want this as an option and including the fully inclosed intake. But I’ll be honest, if you’re not willing to say why it will be “special” I (and likely others) will probably go with soon to be released options from Stillen, Injen, and Jonny Tig.

Would love an alternative to the EVC from JUN BL... 2,000 is just to expensive for me.

 

[SSR Performance]

When you go to register, it requests for your Contact Phone number which doesn't work. It's actually requesting you to reconfirm your email address. Just for anyone who is experiencing issues.

Uh oh.. hope not too many had this issue. I think it should be solved now, I went back and played with the app a little. Thank you very much for the headsup

Great numbers can’t wait to see intake.

Thank you! Can't wait until I'm able to announce them and show them to you guys! Stay tuned good sir!

Interested in seeing your intake and knowing if there is annoying exhaust drone with your axle back.

Right now I'm looking hard at Johnny Tig's intake. They have added ducting to bring in more fresh air from the grill and have done a seemingly good job of routing the piping to the rear so they can add huge air filters. (Just not sure if all of the twists and turns in the pipe will negate the increased filter surface area)

Not sure if there is a way to add an EVC cutout at the axle back flange so you can utilize the stock muflers... Would have to modify the pipe to the muffler to shorten it up I suppose.

Yup! Working as hard as we can to get this intake done for you guys. I'm extremely anxious to be able to release it for you guys as well! Just keep in mind, I mentioned it before and I'll say it again, its going to be a very different design than you guys are used to seeing. Just keep that in mind. It's not going to be the best option for everyone, but it will most definitely light up a fire in some! So just hold tight, I'll have some more information as soon as we are close to releasing it

As far as the axleback exhaust is concerned, the Competition series axleback will sound much like any other muffler delete considering that it's straight pipes. However, the advantage of replacing your stock axleback with our axleback will be the benefits of the larger diameter piping along with the removal of the muffler allowing more flow, therefore increasing performance, as well as the amazing structural integrity of a fully TIG welded Stainless Steel 304 piece

If drone is a major concern for you then our SSR Performance Street Series Electronic Valve Controlled Axle Back Exhaust will probably be the better choice for you. Our goal with that system will be to have the closed version sound as close to stock as possible, and then have the open option mimic our competition series almost exactly both performance and sound wise!

Would love an alternative to the EVC from JUN BL... 2,000 is just to expensive for me.

That is what we are hoping to be able to offer!


Shah @ SSR Performance

 

[RandallK]

I already have an aftermarket exhaust... so my question will be if your downpipe just bolt right up to my current setup?

It’s a standard catback setup?

 

[SSR Performance]

I already have an aftermarket exhaust... so my question will be if your downpipe just bolt right up to my current setup?

It’s a standard catback setup?

Assuming that your current exhaust mates up to the factory downpipes, you will have zero issues fitting our downpipes with your current exhaust setup.

Our parts are 100% modular, they can be use singularly or all in combination in any variation of stock exhaust components. So if you have a part that currently fits the stock downpipes then our downpipes will fit just fine!

I hope that makes sense! haha

Shah @ SSR Performance

 

[RandallK]

Rock on!!! I am excited to see the end result and price!!

 

[Beejumz]

Will you guys be developing an intercooler?

 

[Rango]

Looking forward to your EVC exhaust as well as your intakes!

 

[SSR Performance]

Rock on!!! I am excited to see the end result and price!!

Awesome! Will all be available soon

Will you guys be developing an intercooler?

We have seriously thought about this and may tackle it after we finish developing and have our currently planned performance parts released!

Looking forward to your EVC exhaust as well as your intakes!

Awesome! I will be bumping this thread with those products as soon as they're done!


Shah @ SSR Performance

 

[soulevo8]

Definitely interested in downpipes. Any expected release date or price range?

Keep up the great work!

 

[Angel]

Awesome! Will all be available soon



We have seriously thought about this and may tackle it after we finish developing and have our currently planned performance parts released!



Awesome! I will be bumping this thread with those products as soon as they're done!


Shah @ SSR Performance

Any updates on down pipes and the axle back exhaust?? I am interested on the axle back i hope you can come up with a cost effective solution for those of us not trying to pay an arm and leg.....keep us updated i want intake and axle back...

 

[SSR Performance]

Definitely interested in downpipes. Any expected release date or price range?

Keep up the great work!

Thank you very much for the kind words!

Expected release date on the exhaust components is about 3-4 weeks. We are still working on pricing considering we don't even have the price on the final cost of materials just yet since we will be purchasing all of the components used in bulk (aka your guys' pricing goes down too!) The pricing will be released as soon as we have photos and have tested the final production piece.

When that pricing is released we will also simultaneously be posting up the product pages for pre-order so that you can purchase and be first in line to ship as soon as production finishes. There will be a pretty accurate estimated ship date for these products on that pre-order product page so that you know when to expect your part to show up in the mail along with tracking once it has shipped!

Any updates on down pipes and the axle back exhaust?? I am interested on the axle back i hope you can come up with a cost effective solution for those of us not trying to pay an arm and leg.....keep us updated i want intake and axle back...

They are currently in production. Still waiting on a timeline for when they will be finished. As soon as I have anything semi-accurate I'll be updating you guys via this thread! Also, as I mentioned in the quote above, I will also be posting the pre-order pages up as soon as we have done our final testing on the products for you guys to go ahead and start buying them and be first in line to receive yours once they are ready to ship! Thank you!


Shah @ SSR Performance

 

[Angel]

Thank you very much for the kind words!

Expected release date on the exhaust components is about 3-4 weeks. We are still working on pricing considering we don't even have the price on the final cost of materials just yet since we will be purchasing all of the components used in bulk (aka your guys' pricing goes down too!) The pricing will be released as soon as we have photos and have tested the final production piece.

When that pricing is released we will also simultaneously be posting up the product pages for pre-order so that you can purchase and be first in line to ship as soon as production finishes. There will be a pretty accurate estimated ship date for these products on that pre-order product page so that you know when to expect your part to show up in the mail along with tracking once it has shipped!



They are currently in production. Still waiting on a timeline for when they will be finished. As soon as I have anything semi-accurate I'll be updating you guys via this thread! Also, as I mentioned in the quote above, I will also be posting the pre-order pages up as soon as we have done our final testing on the products for you guys to go ahead and start buying them and be first in line to receive yours once they are ready to ship! Thank you!


Shah @ SSR Performance

I lovt it if the price is right sign me up for an axle back and intake ...keep us updated i want to be first in line LOL

 

[robz32]

Awesome work guys, keep it up, can't wait to see the end results.

 

[SSR Performance]

I love it if the price is right sign me up for an axle back and intake ...keep us updated i want to be first in line LOL

You got it sir! As long as you filled out one of our forms on our website then you will most definitely be contacted and have the opportunity to be one of the very first Stingers on the road with our premium SSR Performance products

If you haven't filled it out yet, go ahead and follow this link and you can do so:
SSR Performance Presents Kia Stinger GT 3.3TT

Awesome work guys, keep it up, can't wait to see the end results.

Thank you very much We promise our quality and attention to detail will not disappoint!


Shah @ SSR Performance

 

[SSR Performance]

Hey guys!

Just a quick update on everything. The official production for our SSR Performance Competition Downpipes along with the SSR Performance Competition Axle Back has begun! We are very excited to announce that just within the next week or so we will be updating the website and opening these products up for pre-order so that you can get in line to be one of the first people to own an SSR Performance product for your Stinger 3.3TT!

Along with the preorder pages we will also be uploading videos / dyno sheets of the products so that you guys will know what to expect as far as sound and performance. Meanwhile, Steven is hard at work finishing up final development / test fitment on our intake system that will be released shortly after the above mentioned items. Sit tight! Things are about to get fast

Shah @ SSR Performance

 

[Angel]

Hey guys!

Just a quick update on everything. The official production for our SSR Performance Competition Downpipes along with the SSR Performance Competition Axle Back has begun! We are very excited to announce that just within the next week or so we will be updating the website and opening these products up for pre-order so that you can get in line to be one of the first people to own an SSR Performance product for your Stinger 3.3TT!

Along with the preorder pages we will also be uploading videos / dyno sheets of the products so that you guys will know what to expect as far as sound and performance. Meanwhile, Steven is hard at work finishing up final development / test fitment on our intake system that will be released shortly after the above mentioned items. Sit tight! Things are about to get fast

Shah @ SSR Performance

HOLY SH#T I JUST JIZZED MYSELF....SO NEXT WEEK WEBSITE WILL BE UPDATED PLEASE UPDATE ASAP...ANY PRICING PLEASE BECAUSE THAT IS GOING TO DETERMINE IF I BUY IT OR NOT LOL....PLEASE BE ON THE CHEAPER SIDE ....

 

[Kamauxx]

HOLY SH#T I JUST JIZZED MYSELF....SO NEXT WEEK WEBSITE WILL BE UPDATED PLEASE UPDATE ASAP...ANY PRICING PLEASE BECAUSE THAT IS GOING TO DETERMINE IF I BUY IT OR NOT LOL....PLEASE BE ON THE CHEAPER SIDE ....

That escalated quickly!

Agree that price is everything. Hopefully the downpipes are of equal quality to Jun Bl at half the price.

 

[NYdito]

Can’t wait to see the intake to finally decide.

 

[Beejumz]

Next up intercooler!
Garrett core. Full piping with twin tial bov fittings.