All New LAP3 Pro-Tuner for the Stinger Coming Soon

[Schumi Jr]

Take my money.

 

[Never thought]

The result is from LAP3 Pro-Tuner only. As you can see, the intakes on the vehicle are stock. The exhaust system is also stock. It is a Bone Stock vehicle. You can definitely expect to see more with bolt-ons. Hyundai & Kia are a bit vague about their torque number: "376 @ 1,300-4,500RPM," so they may have downplayed the torque number. It makes sense for them to safely say that 376tq is being made around 4500RPM and possibly more in earlier RPM. In that regard, ~355ft-lbs(49kgm) @ 4400rpm on our dyno result is quite accurate. Though I see competitor's baseline dyno results showing over 400ft-lbs, it may be due to bolt-ons or their dyno may be reading a bit high. Our baseline however was done on a bone stock vehicle without a single bolt-on.

How would the pro tuner be able to account for bolt on parts like exhaust and intake? Does the pro tuner impact any of the factory safety setttings for the engine that impact reliability?

 

[Angel]

OMG take my money I hope there not too expensive...love it

 

[Angel]

will you still have to get spark plugs and gap them for this tune, and if you have intake will the tune account for it ??

 

[Terra]

Take my money only if price competitive . .

 

[Angel]

Take my money only if price competitive . .

Amen Brother ....There lap 3 chip was price very reasonable if they could keep this around 600-700 I say its well worth it...

 

[Sabz]

I’d be very interested too just need to know about those spark plugs!

 

[Angel]

I’d be very interested too just need to know about those spark plugs!

I am almost 99.9999999999999% that you will need new and re-gapped spark plugs for this tune.

 

[Sabz]

I am almost 99.9999999999999% that you will need new and re-gapped spark plugs for this tune.

I’m sure you are right ... I’ll probably wait until my mileage is up a ways before getting this as I can change out plugs without dealer wondering why i changed them out so soon

 

[Angel]

I’m sure you are right ... I’ll probably wait until my mileage is up a ways before getting this as I can change out plugs without dealer wondering why i changed them out so soon

That is also my concern I been waiting to get a tune, but if this tune comes out and is not priced outrageous I will just buy spark plugs from the stinger store or amazon and put them in. If some crazy shit happens that something fails i will just put the factory plugs back in.

 

[SteveCo]

LAP3 Pro-Tuner result is in!
Bone STOCK Genesis G70 3.3T
Baseline: 335ps/52.1kgm (330whp/376ft lbs)
LAP3 Pro-Tuner: 431ps/63.62kgm (425whp/460ft lbs

Will be following this with interest - if pricing is competitive, there may be one of these in my future ...

@LAP3 Tuning , what were you using for fuel on these Dyno tests?

 

[Angel]

Will be following this with interest - if pricing is competitive, there may be one of these in my future ...

@LAP3 Tuning , what were you using for fuel on these Dyno tests?

Agreed man it look very promising and like if the price is right i am all in......Like my old man use to say its a Korean car let the Koreans handle they know their stuff....The truth is considering the lap 3 was the cheapest out of all the chip tunes.

 

[Kamauxx]

I tried searching the interwebz for info on how much they are selling for in South Korea. I didn't have any luck. There's a couple of forum members living in SK that may have the scoop on pricing.

 

[Angel]

I tried searching the interwebz for info on how much they are selling for in South Korea. I didn't have any luck. There's a couple of forum members living in SK that may have the scoop on pricing.

I just texted my friend which he is from south korea and he is looking into it, he said that that after the currency exchange is about 700 here. He is looking into it once i hear back from him i will update. Remember they could price it higher for the us market there might be other cost invloved there. but if its around 700 man thats a great deal.

 

[Kamauxx]

I just texted my friend which he is from south korea and he is looking into it, he said that that after the currency exchange is about 700 here. He is looking into it once i hear back from him i will update. Remember they could price it higher for the us market there might be other cost invloved there. but if its around 700 man thats a great deal.

Nice job. Thanks man.

 

[Angel]

Nice job. Thanks man.

He lives in south Korea now but he worked with me on my job he is an engineer, unfortunately the company did not want to extend the work visa with all the political stuff going on and he just went back home. But he a car enthusiast and we always talk cars lol

 

[Bryan3.3]

Absolutely. We just have to work on mapping for the 2.0. We are waiting on a test car.

@LAP3 Tuning do you have any alliance partners on the East Coast NJ area? I have a 2.0 that we can guinea pig.

 

[Angel]

any updates on this yet ???

 

[Mp GT2]

waiting

 

[Ucinn]