What did you do to your Kia Stinger today?

[ShannonC]

What mesh is everyone using for the vents? Only thing my home depots had was fiberglass screen door material.

Stainless steel black security mesh.
If you can find a security screen manufacturer you may be able to get an offcut or sample for free.

 

[Stinger GT SS]

What mesh is everyone using for the vents? Only thing my home depots had was fiberglass screen door material.

I used 304 stainless steel 10 count mesh I bought on eBay, the sheet was about the size of an A4 sheet of paper for about AU$7.70 from memory.

 

[2020KGT2]

What mesh is everyone using for the vents? Only thing my home depots had was fiberglass screen door material.

This is what I used.

https://www.amazon.com/dp/B077M93J18?ref=ppx_pop_mob_ap_share

 

[Pnbnationsbest]

She prints out the stinger logo on white permanant stick vynle that she then placed on the cut matte black vynle. I am assuming it will last but since I live in georgia and we are headed into the intinsly humid summer season I think that will be a good test for them to see how they hold up. I'm very happy with the look and dont think the logo will peel. She has been this kind of thing for a long time.

VINYL

 

[jsrob905]

Check this out at Amazon.com
TORIS Stainless Steel Woven Wire Mesh SS304 Cabinets Wire Mesh Air Vent Mesh Security Mesh Window Screen Mesh 5.9"X8.2"(150mmX210mm) 2 Pack https://www.amazon.com/dp/B07413VR8X/ref=cm_sw_r_other_apa_i_9qMWEb9GWWPCK

I used this. Cut out the pattern and then spray painted it black

 

[jsrob905]

We celebrated our first year together today. Here is the first photo I ever took a year ago today.

 

[General_Vodka]

ordered me a little birthday present. It was between Borla and this, and my exhaust is pretty loud with the valves open. I know, I know, I have to finish the car first before I go all out... but it's my birthday, and the euro exchange rate has gone down a bit, and I already dumped an insane amount of money anyways.

 

[jsrob905]

ordered me a little birthday present. It was between Borla and this, and my exhaust is pretty loud with the valves open. I know, I know, I have to finish the car first before I go all out... but it's my birthday, and the euro exchange rate has gone down a bit, and I already dumped an insane amount of money anyways. View attachment 42080

HAPPY BIRTHDAY!!!!

 

[General_Vodka]

HAPPY BIRTHDAY!!!!

Thanks. I expect gifts from all of you on this thread. Cash is preferred. Gotta pay for the parts somehow

 

[RedCal]

The cheque is in the mail

 

[Buzzrush]

Had the Eibach front and rear sways (soft setting) installed on Saturday and I finally got a chance to put her through the paces today. Let me tell you...It's an AMAZING modification! I took her to a particularly twisty road that I often drive on. I normally have to break hard on one of the s-curves as the body roll is pretty dramatic and the rear would hop a bit. Not only did I not have to break, I was actually able to accelerate through the curves with COMPLETE confidence. Body roll has been eliminated by 80% MINIMUM and under steer seems nonexistent. She just dives into curves now...verrrry planted. Does NOT feel like a 4000lb car anymore. Feels super stable at higher speeds and less wobble on rough roads. If you haven't done it yet..this NEEDS to be your next mod!

 

[Stinger GT SS]

Had the Eibach front and rear sways (soft setting) installed on Saturday and I finally got a chance to put her through the paces today. Let me tell you...It's an AMAZING modification! I took her to a particularly twisty road that I often drive on. I normally have to break hard on one of the s-curves as the body roll is pretty dramatic and the rear would hop a bit. Not only did I not have to break, I was actually able to accelerate through the curves with COMPLETE confidence. Body roll has been eliminated by 80% MINIMUM and under steer seems nonexistent. She just dives into curves now. Does NOT feel like a 4000lb car anymore. Feels super stable at higher speeds and less wobble on rough roads. If you haven't done it yet..this NEEDS to be your next mod!

Now fit heavy duty Endlinks, wider tyres & a wheel alignment & you won’t stop smiling or want your journey to end...

 

[Buzzrush]

Now fit heavy duty Endlinks, wider tyres & a wheel alignment & you won’t stop smiling or want your journey to end...

I can imagine! Just the sways completely changed the dynamics of the car...especially when your hoonin a bit I point her and she goes! Love it!

 

[runner1]

Added a coat of reload, updated the JB4, and cleaned the garage floor. Canadian holiday is a 55 deg and rainy mess. Bored silly with a windbooster due this week to make it a better go.

 

[Stinger GT SS]

I can imagine! Just the sways completely changed the dynamics of the car...especially when your hoonin a bit I point her and she goes! Love it!

Totally agree, cornering is precise & fillS you with confidence under hard acceleration that the rear will not skip out on you.
These Swaybars positively change the handling geometry of this car & lifts it to another level & IMHO makes it a true GT.

 

[Buzzrush]

Totally agree, cornering is precise, a fill you with confidence under hard acceleration that the rear will not skip out on you.
These Swaybars positively change the handling geometry of this car & lifts it to another level & IMHO makes it a true GT.

,
Yes she feels very grippy and planted. I'm actually really surprised how much of a difference they make. You don't realize how much roll and under steer the car has until you swap them out. I completely agree with several of your past posts about the bars....this should be everyones first mod.

 

[Hockster]

Installed my Maxton V2 lip. Yes the Maxton logo is off center. Yes it's coming off of there.

 

[runner1]

Looks great! How was the install? Ramps do for room?

 

[Stinger GT SS]

Installed my Maxton V2 lip. Yes the Maxton logo is off center. Yes it's coming off of there.

View attachment 42103 View attachment 42104 View attachment 42105

Looks good, I have the same you should be very happy with it.
Also looking at your pics the logo doesn’t look off centre to me.

 

[Hockster]

Looks great! How was the install? Ramps do for room?

No, bumper has to come off. The lip bolts on and there's no access to the top side unless removed.