3.3TT Update jb4 firmware.

[DrewU272]

If I update firmware from let’s say ver.11 directly you ver.16 will I get all data from versions inbetween? Or must each version be installed in sequence?

 

[Terry@BMS]

Each firmware is fully self contained. Only load the latest.

 

[Mikia]

Each firmware is fully self contained. Only load the latest.

Hey Terry what’s the latest firmware version right now?

 

[cncBilly]

Hey Terry what’s the latest firmware version right now?

Think it's up to 17. Planning on updating today

 

[Terry@BMS]

Hey Terry what’s the latest firmware version right now?

We document firmware changes in the main support thread on n54tech, and in the firmware notes in the app.

 

[Callum]

@Terry@BMS

I rcv’d mine Friday of last week. Should I update. I’m not sure what version mine is on, but the car pulls like a freight train

 

[Terry@BMS]

No need, but good to use BETA app for JB4 mobile: Rev 3.7 Connect Kit App Compatibility Updates - N54Tech.com - International Turbo Racing Discussion

 

[BigBallin]

No need, but good to use BETA app for JB4 mobile: Rev 3.7 Connect Kit App Compatibility Updates - N54Tech.com - International Turbo Racing Discussion

And I saw I n54 only need the beta app if you’re on 3.7 Bluetooth? I just got mine but must have got an older one I’m on 3.6 Bluetooth

 

[Jaymorz]

No need, but good to use BETA app for JB4 mobile: Rev 3.7 Connect Kit App Compatibility Updates - N54Tech.com - International Turbo Racing Discussion

Hi Terry,

I installed the JB4 unit with fuel wires, HKS plugs and loaded firmware 17.

Here are some logs driving around the city (stop n' go) - no highway action, too crowded yesterday.

How do things look? half the logs are on Map 1 the other half are on Map 2.

 

[cncBilly]

Hi Terry,

I installed the JB4 unit with fuel wires, HKS plugs and loaded firmware 17.

Here are some logs driving around the city (stop n' go) - no highway action, too crowded yesterday.

How do things look? half the logs are on Map 1 the other half are on Map 2.

I would suggest you do some WOT pulls. Driving around logs don't cut it.

 

[Jaymorz]

I would suggest you do some WOT pulls. Driving around logs don't cut it.

I believe I had a few pulls yesterday that were near or WOT. Probably not enough for any substantial data then. I'll take it out for a night drive sometime this week on the highway now that the holiday weekend is over.

 

[Terry@BMS]

Only WOT logs are useful, set the app to combine them in to one file too much easier.

 

[Jaymorz]

Only WOT logs are useful, set the app to combine them in to one file too much easier.

Thanks Terry,

I have some WOT data but not nearly enough compared to the "noise" in each log.

Three questions for ya:

1) Whats the time interval for next to "combine logs"?
2) Should I enable auto-logging for WOT pulls? If so what timeout do you recommend. I read 70% on the threshold is decent for WOT logging is that correct?
3) How much "data" or total time of WOT pulls do you need to make a good review?

 

[Terry@BMS]

1 hour interval is fine, default auto-logging setting is fine.

Full throttle 40-90mph for example on a race private track is good enough to evaluate.

 

[Jaymorz]

1 hour interval is fine, default auto-logging setting is fine.

Full throttle 40-90mph for example on a race private track is good enough to evaluate.

Auto-Logging disabled is the default setting? What if I wanted to auto-log at the WOT %?

 

[Terry@BMS]

Should be enabled by default. For JB4 mobile specific questions use the JB4 mobile support thread on n54tech.

 

[Jaymorz]

Should be enabled by default. For JB4 mobile specific questions use the JB4 mobile support thread on n54tech.

Thank you! I did and found a thread with the answer to my question listed :--).