Similar to myself, your fuel looks to be a little too soft for map2
Are use the website from Facebook found that my fuel was an issue.
I ran yours through his diagnostic and this is what I got back:
Boost Safety Check
---------------------------
IAT
-------------------
HPFP Report
--------------------
Throttle Report
-----------------
MethFlowReport
-----------------
Boost Deviations
--------------------
Boost1 and Boost2 To far apart B1: 19.6 B2 12.3 7.300000000000001 TS: 892.75
Boost1 and Boost2 To far apart B1: 14.8 B2 11.9 2.9000000000000004 TS: 1643.0
Could be a bad tank, I literally had a bad tank yesterday and my logs were brutal, prior to that they were decent. Try a different station on the next fill, maybe add some octane boost, and check again is all I can say
I have to advise, I have very basic log reading skills, only relaying info made available and offering my opinion.
I will say this log looks much better. Mild timing issues....might be left over fuel mixing with new
Boost Safety Check
---------------------------
I'll make a minor observation. Your ignition curve on 3 and 5 are way off on your first run compared to the rest. On the second, it looks just like 5 but it's still there. Were your plugs swapped and or regapped? I'm not the best at reading them but I'm pretty sure those variances aren't normal.
19 fixed a few minor bugs for me, Terry himself recommended it. Specifically the option to change maps from the wiper switch, but I'm sure there were tons of other improvements.