Exhaust Tips

[white03]

Nice Iranian rug for the garage...

 

[ggace]

Went with the Akropovic style round tips. They required some grinding of the bumper to fit. They are attached to the Borla cat-back system. The grinding was not visible at all.

Overall, very happy!

 

[Nozzleman123]

Went with the Akropovic style round tips. They required some grinding of the bumper to fit. They are attached to the Borla cat-back system. The grinding was not visible at all.

Overall, very happy!

View attachment 53916View attachment 53917View attachment 53918

What are the size of the tips you used inlet and outlet size , and where did you get them ?

 

[ggace]

What are the size of the tips you used inlet and outlet size , and where did you get them ?

Purchased them from a member on the forum 51mm X 89mm. Fit the Borla system perfectly.

 

[DoctorStiches]

I just like the stock ones :b thank you for all the 46 pages of RnD

 

[Nozzleman123]

Purchased them from a member on the forum 51mm X 89mm. Fit the Borla system perfectly.

Thanks

 

[Bmac]

I just like the stock ones :b thank you for all the 46 pages of RnD

 

[Bmac]

Ditto, but I just added a couple coats of BBQ paint to stock pipes, now no more exhaust mess and I think it looks different/better than the chrome that every other type of car has. Most super cars have black exhaust tips

 

[DoctorStiches]

Ditto

This is my first car with 'proper looking' chrome exhaust tips =b

 

[MichStingerGT1]

Hi I am having a problem with installing tips. i bought MBRP exhaust tips. I went to my local shop and he said the MBRP exhaust isn't lined up with the hole tips on the diffuser. If he put the tips on he said the tips would be hitting the bottom diffuser.you might have to cut the bottom part. im wondering why can't he lift the exhaust up? Maybe not enough room? i got the correct size tips for the MBRP. Has anyone installed tips on MBRP? What can I do in this situation?

 

[Snowwhite]

Hi I am having a problem with installing tips. i bought MBRP exhaust tips. I went to my local shop and he said the MBRP exhaust isn't lined up with the hole tips on the diffuser. If he put the tips on he said the tips would be hitting the bottom diffuser.you might have to cut the bottom part. im wondering why can't he lift the exhaust up? Maybe not enough room? i got the correct size tips for the MBRP. Has anyone installed tips on MBRP? What can I do in this situation?

find a different shop. they can adjust the mufflers at the clamps to the next section of pipes. I didn't have to cut anything and the MBRPs, if undamaged, should line up with the bumper cutouts perfectly.

 

[AYip31]

Hi I am having a problem with installing tips. i bought MBRP exhaust tips. I went to my local shop and he said the MBRP exhaust isn't lined up with the hole tips on the diffuser. If he put the tips on he said the tips would be hitting the bottom diffuser.you might have to cut the bottom part. im wondering why can't he lift the exhaust up? Maybe not enough room? i got the correct size tips for the MBRP. Has anyone installed tips on MBRP? What can I do in this situation?

Oval or around?
Oval needs to be 63x105 no issues, no trimming.
round is 63x89 bumper needs to be trimmed

make sure these are parallel to the ground, should not have any issues with the exhaust tips into the tips.

 

[MichStingerGT1]

Oval or around?
Oval needs to be 63x105 no issues, no trimming.
round is 63x89 bumper needs to be trimmed

make sure these are parallel to the ground, should not have any issues with the exhaust tips into the tips.

Oval 63x105. I went to another shop. He said he can work it out. im not sure what clamps snowwhite I'd talking about.

 

[SKStinger]

Oval 63x105. I went to another shop. He said he can work it out. im not sure what clamps snowwhite I'd talking about.

He's talking about the clamps on the rear section of the exhaust. You can loosen them and adjust the pitch of the rear mufflers and tips so that they line up nicely in the diffuser openings.

 

[Alain9994]

Purchased them from a member on the forum 51mm X 89mm. Fit the Borla system perfectly.

I have the original exhaust, what is the original inlet size in your opinion

 

[ggace]

I have the original exhaust, what is the original inlet size in your opinion

Sorry I didn't take those measurements so I really have no idea =(

 

[AYip31]

I have the original exhaust, what is the original inlet size in your opinion

Are you talking about the stock exhaust?

 

[Alain9994]

Are you talking about the stock exhaust?

Yes

 

[Alain9994]

Sorry I didn't take those measurements so I really have no idea =(

Tnx

 

[AYip31]

Yes

Why would you want aftermarket tips for the stock exhaust?

But from what I’ve read.
Around, 51x89, need to trimming the bumper
Oval, 51x105, no trimming