Does this look right?

[landonhorling]

I just started to advance my knowledge of tuning and decided to push my kia stinger gt-line 2.0l farther. This car currently has a magnaflow exhaust, cold air intake from injen, performance spark plugs, and a jb4 tuning module. I have been running and playing with map 1-2 but decided I wanted to try map 3.
I mixed 6.7 gallons of e70 with 8.4 gallons of 91 octane to create 95 octane.
This is the graph for a pull I did does everything look good statistically wise

 

[ChaneRZ]

Post csv file

 

[landonhorling]

There is the csv for that graph

 

[landonhorling]

Post csv file

There is the csv for a map 3 pull I did

 

[landonhorling]

Bur this is the main csv file

 

[SneakerB]

your pulling alot of timing in the first log,,, but you need to do a wide open throttle pull from 2 gear to 4th gear and post the log!

 

[landonhorling]

your pulling alot of timing in the first log,,, but you need to do a wide open throttle pull from 2 gear to 4th gear and post the log!

Down toward line 335 is where the pull was

 

[rpoffen]

Down toward line 335 is where the pull was

Not sure what's right for a 2.0t, but you are getting close to 29PSI boost, not sure what is considered too much.
I know if that were the 3.3, it would be overboosting.
There are some timing corrections, but not terrible. I know on the 3.3, sometimes you needc to disconnect the battery for a few minutes so the ECU relearns fuel maps to get rid of the corrections.

 

[ChaneRZ]

JB4 was set at 24 max psi. Should’ve put you to safety mode.

 

[landonhorling]

Not sure what's right for a 2.0t, but you are getting close to 29PSI boost, not sure what is considered too much.
I know if that were the 3.3, it would be overboosting.
There are some timing corrections, but not terrible. I know on the 3.3, sometimes you needc to disconnect the battery for a few minutes so the ECU relearns fuel maps to get rid of the corrections.

Good idea I'll give that a try!

 

[landonhorling]

JB4 was set at 24 max psi. Should’ve put you to safety mode.

Wdym?

 

[rpoffen]

JB4 was set at 24 max psi. Should’ve put you to safety mode.

Something for Terry to answer. Not sure when that comes into play.