Brake Vent Fix

[AV8R]

If you're going to sell something, please start a thread in the Member Classifieds section. You can certainly post a link to it here, but please keep discussion about the sales in that thread.

I thought the classifieds are for one item only not repeat sales of the same item, to me that becomes a vendor and needs approval.

 

[DiabloStinger]

I sure could use that template right about now.... I promise I won’t sell anything. Just need to protect this beast. @AV8R

 

[Kamauxx]

I sure could use that template right about now.... I promise I won’t sell anything. Just need to protect this beast. @AV8R

Check page 2 post 38.

 

[AV8R]

I quote the rules;
Selling of individual items is permissible by a private owner in our Classifieds forums, however selling multiple items of the same product is considered a commercial post and may be removed at the discretion of moderators and/or staff.

 

[AV8R]

I sure could use that template right about now.... I promise I won’t sell anything. Just need to protect this beast. @AV8R

Its there and free to use to make your own screen, just not happy that others on sell my work despite who originally came up with the idea, that is not why I posted it. I want all members to benefit from any ideas or stuff I submit without any exchange of money going on . That’s what this forum is about!

 

[AV8R]

Oh and one other thing...
If you install the mesh over the vents and under lining you will have issues with water getting into the area behind the lining not like I did. The lining has to lip over the vent to prevent water getting in. That’s why I don’t need pins , staples , glue or screws to hold it in place.

 

[DiabloStinger]

Oh and one other thing...
If you install the mesh over the vents and under lining you will have issues with water getting into the area behind the lining not like I did. The lining has to lip over the vent to prevent water getting in. That’s why I don’t need pins , staples , glue or screws to hold it in place.

Appreciate the work you did and thanks for the tips.

 

[AV8R]

Appreciate the work you did and thanks for the tips.

Thanks, you’re welcome!

 

[Fl stingergt]

Ya read back a few post I put where to get mesh and how to do. You don’t even need templates. Took all of 15 minutes. So settle down Nancy. Plus I was the one who brought up the dam problem. So quick acting like a bunch of girls. What you don’t want me to overcharge for stuff like everyone else in this forum.

 

[Fl stingergt]

Dam half the people on this forum don’t even own stingers yet. So give me a break. I put how to do it yourself for free.

 

[AV8R]

Ya read back a few post I put where to get mesh and how to do. You don’t even need templates. Took all of 15 minutes. So settle down Nancy. Plus I was the one who brought up the dam problem. So quick acting like a bunch of girls. What you don’t want me to overcharge for stuff like everyone else in this forum.

Listen this forum does not need people like you name calling other members so don’t call me a Nancy or a bunch of girls or to settle down. If you have read the rules what you doing is wrong by selling them on forum. Your original post explained you staple them on yet the photos you posted were not stapled and replicated my fix. Yes you did start the forum idea but asking money for it is not appropriate.
I strongly advise you stop name calling and be respectful as you are in breech of the rules .

 

[westcoastGT]

Group hug ???? are we all good here now ? I'm sure nobody wanted to be nasty or break the rules , sometimes we get passionate on issues here and it boils over , hey what about those Weathertech mats ?