Door power question

nagisa

Member
Joined
Sep 29, 2020
Messages
82
Reaction score
27
Points
18
Going to be wiring in an ambient LED system all throughout the car

Each door comes with it's own controller that connects to each other wirelessly but needs 12v power to each controller

Anyone aware of if there's a 12v constant power in each door? Guessing to control the windows should have that

From a video I found it looks like there's a harness.

Anyone got a diagram know which wires to tap into?

1657685844237.webp
 
In case anyone else needs this info

From testing the harness all pins are no power except for the battery (pin 10)

Ill attach the wiring portion below


All other portions are no power when the cars off


I needed this for car interior ambient lighting for each door

The best option and what I settled on was the Illumination pin (6) which gives 12v at night or when your headlights are on

So during the day the lights are off unless you put on headlights or parking lights
And if on auto, automatically turns on at night


This is just for the rear, but front should be the same, will finish this project next week for the front doors



Screenshot_20220811-165724_Gallery.jpg
 
______________________________
update: passenger door is good

1662496686650.webp


driver side seems odd tho, it does have illumination but no specifications on the diagram of which one is illumination
and there's 2 grounds

will have to bust out the volt meter again for this one


1662496725100.webp
 
Pictures of how its going so far?
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
not familiar with one from australia but probably similar?
its called symphony ambient lighting kit from aliexpress/china (it's like $100 for the kit)
 
update: passenger door is good

View attachment 74411


driver side seems odd tho, it does have illumination but no specifications on the diagram of which one is illumination
and there's 2 grounds

will have to bust out the volt meter again for this one


View attachment 74412
What port did u get the power from so it turns on at night? Im trying to connect my last last which is driver side door.
 
______________________________
From interior to exterior to high performance - everything you need for your Stinger awaits you...
What port did u get the power from so it turns on at night? Im trying to connect my last last which is driver side door.
How about the front passenger door is there a constant hot when car turn on?
 
What port did u get the power from so it turns on at night? Im trying to connect my last last which is driver side door.
I need to find a constant hot for front passenger door from orange hardness plug diagram
 
I need to find a constant hot for front passenger door from orange hardness plug diagram
Looking at the diagrams already provided in this post, it does not look like there is power (hence why the OP used illumination and the ambient only works with lights on).
Finding constant hot (if there is one) is the easiest thing in the world to do, just unplug the harness, then with multimeter or probe, connect to ground and then (with car fully off) test the pins.
 
Looking at the diagrams already provided in this post, it does not look like there is power (hence why the OP used illumination and the ambient only works with lights on).
Finding constant hot (if there is one) is the easiest thing in the world to do, just unplug the harness, then with multimeter or probe, connect to ground and then (with car fully off) test the pins.
Yup found a constant hot on the harness all done with the ambient lighting.
 
Yup found a constant hot on the harness all done with the ambient lighting.
Also hows your jb4 do you get alot of codes or limp mode when flooring it hard looking into them
So far i got aem intake xforce exhaust system with mid/downpipes
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Also hows your jb4 do you get alot of codes or limp mode when flooring it hard looking into them
So far i got aem intake xforce exhaust system with mid/downpipes
No codes or any issues at all with my JB4. Granted, I keep it mostly on Map 1 since I I am not running WMI or mixing gas
 
______________________________
Isnt map 2 for 93 only and 91
Correct, map 2 is for 93 octane.
Unfortunately there is no 93 octane where I live. There is one gas station that caries I believe 101 octane racing gas, and absolutely everywhere else tops out at 91 octane.
 
Correct, map 2 is for 93 octane.
Unfortunately there is no 93 octane where I live. There is one gas station that caries I believe 101 octane racing gas, and absolutely everywhere else tops out at 91 octane.
Oh ok thank you
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Back
Top