Check this out!!! (ECS control module)

Sounds like you're the guinea pig, you tell us!
 
Hey guys. I just purchased. Is there a link to the installation?

I also noticed that under the custom settings in the app, when you adjust ride handling there is a bar that slides at the bottom left and right. Is it to adjust the speed reaction of the shock at any given speed?

That slider, in the advanced tab, allows you to select damper stiffness at a particular speed (range).
 
Thanks, that confirms what I thought. Now if I can only figure out which wire to connect the red power wire to, and where the black connectors are supposed to connect to. The pics on eBay aren’t really clear. Hopefully the Korean directions have good pics.
 
______________________________
Thanks, that confirms what I thought. Now if I can only figure out which wire to connect the red power wire to, and where the black connectors are supposed to connect to. The pics on eBay aren’t really clear. Hopefully the Korean directions have good pics.

We might find that the directions are Korean Only... I have yet to see them in English.
When mine arrives, I’ll do a DIY installation vid for the forum.
I’ll have to get it all apart first to see what it entails.
 
Thanks Ty. Let’s stay connected in case we get stuck.

Do you know if there are pictures with the directions?
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
There is no english manual (just asked)
 
There is no english manual (just asked)
You're very handy here on the forum:D, will you be our ECS translator?;)......please.:)
 
Will do.

I saw the instruction pamphlet from some of the Korean installations, I saw no pictures and no English. Lol!
Here's the instruction image from the guy a few posts back selling the module on ebay - it's public (he posted the link) so I hope I'm not upsetting anyone.. Seems like you might need to tap power for the module?
s-l1600.jpg
 
That’s what I was looking at. But:

1. which wire to tap
2. Does the ground wire go anywhere specific
3. Where do the connectors connect to
4. Are there any special instructions. I’m assuming the battery needs to be disconnected.
 
______________________________
From interior to exterior to high performance - everything you need for your Stinger awaits you...
As they say the selected suspension option is maintained between vehicle starts, I hope the mode selection, and any customized configuration settings, are stored in non-volatile memory.

Otherwise, the power connection would need to be to a constant 12V (vs switched) source - and any stored values would be lost if the battery were to be disconnected/go flat.
 
Here's the instruction image from the guy a few posts back selling the module on ebay - it's public (he posted the link) so I hope I'm not upsetting anyone.. Seems like you might need to tap power for the module?
s-l1600.jpg
If you only find the ECS connector on the bottom of the steering wheel,
There is no problem with the installation.
For the other red wiring, if you only connect power to junction box
The installation is complete.
There is a limit to the picture.
 
If you only find the ECS connector on the bottom of the steering wheel,
There is no problem with the installation.
For the other red wiring, if you only connect power to junction box
The installation is complete.
There is a limit to the picture.

Can you please explain “junction box”? Do you mean fuse box, and if so where in fuse box do you connect?

Thank you for your help.
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Read through it and I might be missing it. Is the app ALWAYS necessary to change the drive preferences? Or after the first run will it save the newer settings to our mode switch?
 
______________________________
Eh, never got a PayPal invoice. Sorta lost interest.

If anybody gets one holler lol
 
Eh, never got a PayPal invoice. Sorta lost interest.

If anybody gets one holler lol

Never got that invoice from my independent source either.
Oh well...

However, @jongkihong posted in this thread that his company will ship these to the USA.
He even provided an EBay link.
I ordered on Saturday night on EBay.
It arrived on Wednesday morning.
Someone does have to be home to accept the FedEx package, so I didn’t get it until today.

Anyway, I am shocked at the super, super, super fast shipping from this Korean seller.

The tuner arrived quickly and well packaged.

I’d you need one, order from @jongkihong

I’ll keep everyone posted with results after installation.
 
Never got that invoice from my independent source either.
Oh well...

However, @jongkihong posted in this thread that his company will ship these to the USA.
He even provided an EBay link.
I ordered on Saturday night on EBay.
It arrived on Wednesday morning.
Someone does have to be home to accept the FedEx package, so I didn’t get it until today.

Anyway, I am shocked at the super, super, super fast shipping from this Korean seller.

The tuner arrived quickly and well packaged.

I’d you need one, order from @jongkihong

I’ll keep everyone posted with results after installation.

Thank the lord, there is sun light lol

I'll probably order soon then. I'll wait to hear from ya!
 
[QUOTE = "Ty Davis, 게시물 : 219725, 회원 : 6654"] 내 독립 소스에서 해당 인보이스를받지 못했습니다.
오 잘 ...

그러나 [USER = 1581] @jongkihong [/ USER]는이 스레드에 자신의 회사가 미국으로 배송 할 것이라고 게시했습니다.
그는 심지어 이베이 링크를 제공했습니다.
나는 이베이에서 토요일 밤에 주문했다.
수요일 아침에 도착했습니다.
FedEx 패키지를 받으려면 누군가 집에 있어야하므로 오늘까지받지 못했습니다.

어쨌든, 나는이 한국 판매자의 슈퍼 슈퍼 슈퍼 배송에 충격을 받았습니다.

튜너는 빠르고 잘 포장되었습니다.

[USER = 1581] @jongkihong [/ USER]의 주문이 필요합니다.

설치 후 모두가 결과를 게시하도록하겠습니다. [/ QUOTE]
:thumbup::thumbup::thumbup::thumbup::thumbup:


I send the product to the FedEx pack.
Average delivery time to US is 1-2 days.
If you order on a Friday or weekend
This may take 2-4 days.
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Back
Top