WMI starting to loose boost??

Joined
Dec 5, 2021
Messages
29
Reaction score
5
Points
3
So I finally got the meth kit installed and working great! Until I hit third gear and and air is pouring out of my car which I can only assume is through the blow off valves. I’ve tightened the springs without luck so far any ideas???
 
Also switched back to map 3 did several pulls without any problems
 
It’s only doing it in sport mode as well it runs amazing in comfort
 
______________________________
Aftermarket BOV's cause more issues than any other mod. Put your originals back on and see if it's still doing it. My guess it they can't handle the additional boost which makes it a BOV problem not a JB problem.
 
Log?
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Going to run more logs that was just drive home from work
 

Attachments

  • E0FFBE59-BD6C-402E-9DC8-F28B1DC3D553.webp
    E0FFBE59-BD6C-402E-9DC8-F28B1DC3D553.webp
    51.5 KB · Views: 5
  • 49D9641F-BBBA-4C41-B50B-FA92B89D2B04.webp
    49D9641F-BBBA-4C41-B50B-FA92B89D2B04.webp
    89.7 KB · Views: 5
Post the CSV for the logs
 
______________________________
From interior to exterior to high performance - everything you need for your Stinger awaits you...
EWG connectors on JB4? If not adding those may help with boost. If its leaking boost its not a large leak.
 
EWG connectors on JB4? If not adding those may help with boost. If its leaking boost its not a large leak.
Nope that’s the next purchase I’ll give that a shot. It just sounds loud idk if it’s the valves or what I’ll try those then circle back. Thanks for all the help terry! Love the system!
 
Back
Top