For Sale Well looks like it's part out time....

2.1 million deer hits per year??? o_O Daylight saving for does? Keeping practice year-round would prevent thousands of deer deaths, driving injuries

General's fatal encounter (to the car, who cares a damn about the damned deer!?) had his name written on it. But seriously a 2.3% reduction if we stayed on DST year-round is hardly significant in this "shooting gallery" that we are negotiating yearly. Even in the city - Salt Lake County, aka "Salt Lake City" generally - which has c. 1.2 million people in it, I see deer within walking distance of my house almost yearly, and I've seen two dead deer on 9000 South and Old Bingham Hwy within the last five years, so, literally this can happen anywhere. I'm just flabbergasted at that number, 2.1 MILLION per year: any amount of reduction to the risk is worthwhile, in my opinion. Utah is quite possibly going to permanent DST within this next cycle.
I’ve seen 10 dead deer on the side of the road just the last two weeks.
Always bad this time of year.
 
I’ve seen 10 dead deer on the side of the road just the last two weeks.
Always bad this time of year.
On my trip to Wisconsin and back, it was a rare five mile stretch that didn't contain roadkill. I did see a lot of large roadkill too.
 
Due to an unfortunate accident with a deer my stinger is now bound once more for the salvage auction. RIP :confused: Been a good couple of years, will miss it. Sure was a journey with this car. Just a reminder that nothing lasts forever and metal is replaceable. Managed to pull off a couple of parts before insurance claimed it.
Pickup near Sacramento CA preferred, can ship the smaller stuff.
Ark SFX carbon fiber hood. Very good condition, surprised it didn't get damaged. - $1.2k
Low pressure hood struts - free with hood otherwise -$60
BMS engine strut braces Red, the coating is worn off in some places. -$120
BMS engraved vanity covers - $80.
Tuxmat V1 front and rear floor mats RWD. Missing a few clips -$140.
OEM all weather trunk cargo tray -$90
Pierburg 7.22908.03.0 Electric Switch Over Valve -$25
Mando ECS10 unit with missing signal connector, tried to contact Mando to get the connector to no avail. -$?
Spool ethanol dongle, didn't get to pull off the sensor itself -$?
Also have Mishimito Front mount intercooler in the box, never installed. No couplers, just the FMIC. -$250
Stock parts: intercooler, merge pipe, charge pipes, intakes, mid pipes, stock exhaust with active cutouts, transmission cooler, exhaust tips, trunk tray cover, front and rear sways and endlinks, and probably some other misc parts if anyone is interested.
I'm sorry to hear about the unfortunate accident.

If it's still available, I'm interested in the Mishimito Front mount intercooler. I already have charge pipes (aFe Bladerunner cold and hot side), I just have to check if the pipes are the same or of a similar measurement.
 
______________________________
Can you send me any pics of the bms braces. Just curious how much wear we are talking about.
 
Sorry to hear about your incident. Hope you are OK.
Too bad you couldn’t get more stuff from the car, I would have been interested.
Good luck man.
Hey I got a question for you. I see that you got the K&N typhoon intakes. When you installed them, did and do you hear your intakes inside the car? Like when you hit the throttle like the sound of a carburetor when you open the throttle without the air cleaner on it? I have the k&n’ sand I can hear the sound of throttle inside my car. Like once I installed them i can now hear the sound of the suction of air as I press on the throttle very loud.
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Hey I got a question for you. I see that you got the K&N typhoon intakes. When you installed them, did and do you hear your intakes inside the car? Like when you hit the throttle like the sound of a carburetor when you open the throttle without the air cleaner on it? I have the k&n’ sand I can hear the sound of throttle inside my car. Like once I installed them i can now hear the sound of the suction of air as I press on the throttle very loud.
I have BMS intakes and the sound is noticeable inside the cabin, more so with the windows down.
Any open intake will make noise.
You will hear the BOV’s too.
 
I'm sorry to hear about the unfortunate accident.

If it's still available, I'm interested in the Mishimito Front mount intercooler. I already have charge pipes (aFe Bladerunner cold and hot side), I just have to check if the pipes are the same or of a similar measurement.
Nevermind on the intercooler. I have the BMS intercooler arriving tomorrow.
 
Do you have any steering pieces or is the car gone? I may have f&*%ed up an inner and outer tie rod today...
 
______________________________
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Just received intercooler, she’s beautiful, thanks again ttt
 
So sad to hear about it - such a nice color too :-)

Glad you're ok.
 
Interested in the Cf hood and BMS braces pm when you got time to see if we can work out a deal.
 
Interested in cf hood and BMS braces. Pm when you got a chance, would love to work out a deal
 
Still got the tuxmats for sale?
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Hi i am in Sacramento area ..do you still have parts available?..looking for possibly a few items?
 
______________________________
would you ship the OEM all weather cargo tray? zipcode 93033. Thanks
 
Hi, do you still have the Mando ECS module?
 
Any chance you still have the under engine cover/splash guard? Mine came loose and I drug it down the interstate for a while. Thank goodness for cable ties and some seriously nice good old boys (in the best sense of the word) at a little garage in the middle of nowhere. Don’t really want to spend the serious dollars to replace
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Back
Top