Steering Wheel Center with "E" logo

[bumble bee]

Very simple.

 

[SteveCo]

That looks great. Was it easy to install?

Yes, about as easy as it comes. You just clean the existing badge, apply the adhesive promoter that ships with the new badge, then adhere the new badge over the top after removing the backing from the 3M adhesive film on the underside. It's a quality piece, made of stamped, contoured metal with a 3D raised logo and a nice high gloss graphic.

 

[Kingmass17]

Yes, about as easy as it comes. You just clean the existing badge, apply the adhesive promoter that ships with the new badge, then adhere the new badge over the top after removing the backing from the 3M adhesive film on the underside. It's a quality piece, made of stamped, contoured metal with a 3D raised logo and a nice high gloss graphic.

Awesome. I’ll be picking that up. Makes it look so much better, sleeker

 

[robz32]

Yes, about as easy as it comes. You just clean the existing badge, apply the adhesive promoter that ships with the new badge, then adhere the new badge over the top after removing the backing from the 3M adhesive film on the underside. It's a quality piece, made of stamped, contoured metal with a 3D raised logo and a nice high gloss graphic.

Being installed on top of the KIA emblem. Does it protrude a lot?

 

[bumble bee]

Not at all, I think its flush.

 

[Kia Stinger]

Being installed on top of the KIA emblem. Does it protrude a lot?

It's a thin, but very well-made piece...

 

[SteveCo]

Being installed on top of the KIA emblem. Does it protrude a lot

Any additional thickness is not noticeable - the metal is very thin, but sturdy enough for the task as it matches the existing contour and is fully supported when installed. Loden did their homework in the design stage.

 

[Kia Stinger]

Any additional thickness is not noticeable - the metal is very thin, but sturdy enough for the task as it matches the existing contour and is fully supported when installed. Loden did their homework in the design stage.

Their wheel center caps are insanely high quality as well. The front and rear badges should be ready in a week or so...

OEM Style "Vintage K" Wheel Center Cap Overlays - The Stinger Store

 

[Hojae84]

We sold several products on eBay.
Several buyers have been contacted in advance ...
Compatible with North America and Canada.
Europe seemed mostly incompatible ...
There are two types of stinger airbags.
DEPOWERED, ADVANCE
Airbags sold in Korea are advanced ...
North America and Canada were mostly advanced types.
However, most of Europe, such as UK, Spain and Poland, are DEPOWERED type ...
In North America and Canada, they have the latest airbags
Europe and elsewhere knew that there was an old airbag installed.

Advanced type than DEPOWERED
It is one step upgraded airbag ...
Please refer to it.

I just installed the e airbag module this morning. Have gt2 and the airbag module worked fine. Easy swap there are 3 holes on steering wheel (by paddle shifters n one at bottom). Stick a Philip's screwdriver on sides then bottom and it pops out. Of course battery should be disconnected and give a few minutes before doing any work for safety reasons. Thanks @jongkihong for e airbag module.

 

[jongkihong]

hello
Congratulations on installation. ~ !!!
Looks very good ... ~ !!

 

[4WDlifeform]

I don't have my stinger yet.. But been looking into the badge change. I already bought all the badges for the exterior from the store here.

I found one for a Sportage, it looks like the stingers "GT" logo. Wondering if it would fit the Stinger? I guess since I am new to this forum, I am not able to post links/photos. Paste this into Google, and it should pop right up:

SPORTAGE QL STYLE "GT" STEERING WHEEL EMBLEM BADGE LOGO REPLACEMENT

EDIT: I sent an email to that company, I'll advise if I hear anything.

 

[jongkihong]

...

 

[ballistic]

I don't have my stinger yet.. But been looking into the badge change. I already bought all the badges for the exterior from the store here.

I found one for a Sportage, it looks like the stingers "GT" logo. Wondering if it would fit the Stinger? I guess since I am new to this forum, I am not able to post links/photos. Paste this into Google, and it should pop right up:

SPORTAGE QL STYLE "GT" STEERING WHEEL EMBLEM BADGE LOGO REPLACEMENT

these are getting very popular
OEM Style "Vintage K" Steering Wheel Emblem - The Stinger Store

 

[4WDlifeform]

I have seen the "K" logos, however I went with the "E" badge for the front, and thought the "K" wouldn't go with the style. I'll be leaving the GT on the rear, so that would tie in with the steering wheel... just a thought.

 

[Markoware]

We sold several products on eBay.
Several buyers have been contacted in advance ...
Compatible with North America and Canada.
Europe seemed mostly incompatible ...
There are two types of stinger airbags.
DEPOWERED, ADVANCE
Airbags sold in Korea are advanced ...
North America and Canada were mostly advanced types.
However, most of Europe, such as UK, Spain and Poland, are DEPOWERED type ...
In North America and Canada, they have the latest airbags
Europe and elsewhere knew that there was an old airbag installed.

Advanced type than DEPOWERED
It is one step upgraded airbag ...
Please refer to it.

In case anyone is on the fence like I was I’ll chime in. I too installed an airbag from @jongkihong. Very easy swap and only took a few days to receive the airbag.

 

[jongkihong]

In case anyone is on the fence like I was I’ll chime in. I too installed an airbag from @jongkihong. Very easy swap and only took a few days to receive the airbag.

Congratulations on successful installation ~ !!

 

[JustThatPenguin]

To the two dealers here offering this e airbag piece. What are shipping times like? In town for a week. Looking to have it finished by then.

 

[TuscaniCustoms]

It takes a while before it comes in from mobis so the last time I got the order it took like 2 weeks plus shipping time. It just doesn't happen any faster.

 

[JustThatPenguin]

I was hoping someone had this in stock already. Thank you for the quick reply.

 

[TuscaniCustoms]

Nothing sells frequently enough to keep any stock.