Squared setup any thoughts

[MerlintheMad]

Aftermarket Wheels
Looks like mine are in just a tad in front, and flush in back:

 

[mhal8876]

What wheels are those?

ESR RF2 in Hyper black Titanium

 

[YOWStinger]

SO SHINY

 

[MerlintheMad]

ESR RF2 in Hyper black Titanium
View attachment 24296

Did you ever take pics of your two Stingers together? Share, please; in other words, go take a couple if you haven't already, or post some if you have.

(edit: oh, I see your avatar sort of has her Micro Blue showing. Surely you can do better than that.)

 

[mhal8876]

Did you ever take pics of your two Stingers together? Share, please; in other words, go take a couple if you haven't already, or post some if you have.

(edit: oh, I see your avatar sort of has her Micro Blue showing. Surely you can do better than that.)

Sure! will do that

 

[turboAWD]

I'm guessing that an extra pair of rear OEM (staggered 19") wheels won't fit up front to go 255 all around? That would just be too easy?

 

[mhal8876]

I'm guessing that an extra pair of rear OEM (staggered 19") wheels won't fit up front to go 255 all around? That would just be too easy?

Nope it wont clearance issue on on the front. Might as well go Aftermarket wheels for that! And the OEM wheels are freakin heavy too.

 

[Bill Lesser]

255/19 s 9.5 wide squared awd on eibachs

 

[Manaz]

Nice wheel! Side-specific too I see!

 

[turboAWD]

Nope it wont clearance issue on on the front. Might as well go Aftermarket wheels for that! And the OEM wheels are freakin heavy too.

Too bad - it would be the cheap way.. I honestly don't care about every pound.. With jb4 (eventually), I'll be way ahead of my previous car..

 

[YOWStinger]

Too bad - it would be the cheap way.. I honestly don't care about every pound.. With jb4 (eventually), I'll be way ahead of my previous car..

It’ll fit with 10-15mm spacers up front.

Just FYI though, if you want light, check out American Racing AR924, they’re flow formed, ultra light and inexpensive. Probably in as-cheap-as-stock territory. The 20x10.5s are 24lb, 20x9 are 23lbs

 

[MerlintheMad]

...

Just FYI though, if you want light, check out American Racing AR924, they’re flow formed, ultra light and inexpensive. Probably in as-cheap-as-stock territory. The 20x10.5s are 24lb, 20x9 are 23lbs

I wouldn't call those exactly "ultra light". There are rims running on here that are under 20 lbs. Mine are 21-21.5 lbs (fronts are a tad heavier). The stock rims are way more expensive than anything we get with aftermarket. I priced them at the dealer at $630 apiece!? They also weigh 33-34 lbs.

 

[Jacques]

I wouldn't call those exactly "ultra light". There are rims running on here that are under 20 lbs.

Are they inexpensive though? I'm looking at aftermarket wheels and doing a square setup, keeping it at 19s, light, but wheels don't have to break the bank on cost. 21ish lbs/wheel or lower is my target.

 

[Tobstertx3]

ESR RF2 in Hyper black Titanium
View attachment 24296

Damn, what do you use to polish her? You have a ceramic coating?

 

[YOWStinger]

I wouldn't call those exactly "ultra light". There are rims running on here that are under 20 lbs. Mine are 21-21.5 lbs (fronts are a tad heavier). The stock rims are way more expensive than anything we get with aftermarket. I priced them at the dealer at $630 apiece!? They also weigh 33-34 lbs.

If there’s lighter 20" rims, I would be interested to know. Certainly at that price point.

TSWs are in the 28lb range, same with Niche and other wheels I’ve seen, I haven’t seen any wheels in this 23-24lb range. I’m not looking at high end forged wheels though.

 

[MerlintheMad]

If there’s lighter 20" rims, I would be interested to know. Certainly at that price point.

TSWs are in the 28lb range, same with Niche and other wheels I’ve seen, I haven’t seen any wheels in this 23-24lb range. I’m not looking at high end forged wheels though.

Oh, 20". Heh, missed that detail. Sorry.

 

[YOWStinger]

Oh, 20". Heh, missed that detail. Sorry.

They don’t make an 18/19" wheel with our PCD unfortunately. As a tip, from what I can see we share fitment with Mustangs, looks like generally speaking, if it fits a mustang it fits a stinger. So if you’re looking for wheel ideas you can look on mustang and Camero forums.

 

[Generic1]

Pics? Also are you AWD . Do you think adding so much width on the front might stress the front drivetrain?

What’s the drop on the springs? Any rubbing issues with a full load?

 

[turboAWD]

255/19 s 9.5 wide squared awd on eibachs

Same offset, front and back? I.e. can do true 4-wheel rotation?

 

[YOWStinger]

Either way, you could always go for the slightly higher offset and put on spacers to get them where you want