Some questions

Hzaza

Member
Joined
Mar 27, 2021
Messages
39
Reaction score
17
Points
8
Had my 2021 stinger gt1 for about 6 months now and i love it, so far got injen intakes, borla type s catback, jun bl secondary down pipe, and today i installed hks spark plugs gapped .024, jb4 tune and add w1 OCC. i used the hoses that came with can and i get a hissing sound from pcv side. I tried to tighten/loosen connection but sound still there, did soap method and no bubbles forming, is this normal?? Also i run 93 octane so map 2 would be best? Thank u guys in advance!
 
93 on map 2 is fine. you have no bubbles because its vacuum. no bueno to have a vacuum leak. tighten the clamps if possible. check dip stick if the can has one for leak also
 
93 on map 2 is fine. you have no bubbles because its vacuum. no bueno to have a vacuum leak. tighten the clamps if possible. check dip stick if the can has one for leak also
I tightened the crap out of the lines didn’t wanna over do it in fear of breaking the nipple piece, might get a little thinner line tomorrow this one a-lot thicker than the factory one i took off
 
______________________________
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Had my 2021 stinger gt1 for about 6 months now and i love it, so far got injen intakes, borla type s catback, jun bl secondary down pipe, and today i installed hks spark plugs gapped .024, jb4 tune and add w1 OCC. i used the hoses that came with can and i get a hissing sound from pcv side. I tried to tighten/loosen connection but sound still there, did soap method and no bubbles forming, is this normal?? Also i run 93 octane so map 2 would be best? Thank u guys in advance!
O rings installed? Or teflon tape? Have you tried using both?
 
Back
Top