For Sale Part Out JB4 BMS FMIC Carbon Fiber

[Russell Buzz Buzz]

Part out Sale: shipping not included. Located in Maryland

Ark Deck Lid CF spoiler (ceramic coated) - $750
JB4, Bluetooth, EWG wires- $600
BMS WMI stealth kit, 1 gallon tank, FSB module, BMs10 nozzle, solenoid- $600
NGT Hi Flow primaries (about 2k miles)- $750
WOT Box stage 2 launch controller - $175
BMS FMIC - $500
Filter relocation kit (custom 3d printed kit) - $100

 

[playerbase]

High flow primaries vs a catless midpipe/secondary hmm

 

[Russell Buzz Buzz]

Catless secondaries will get you minimal
Performance but a slightly deeper exhaust sound.

HFC primaries will give you a deeper sound as well as performance. For example I was running 11.1 in the 1/4. I swapped my primaries and ran 10.97.

 

[playerbase]

Catless secondaries will get you minimal
Performance but a slightly deeper exhaust sound.

HFC primaries will give you a deeper sound as well as performance. For example I was running 11.1 in the 1/4. I swapped my primaries and ran 10.97.

If I'm not wrong wouldn't HFC cause a check engine light? Is there anyway around that other than an ecu tune?

 

[Russell Buzz Buzz]

Lap3 protuner or JB4 with EWG wires will take care of that if it came in. HFCs allow you to still pass Emissions so you might not get any CELs

 

[playerbase]

Lap3 protuner or JB4 with EWG wires will take care of that if it came in. HFCs allow you to still pass Emissions so you might not get any CELs

Have you done emissions with the hfc on the stinger? Also we’re you able to here the turbo “whistle” if you want to call it that through the exhaust with it installed and does the hfc come with any hardware (nuts/bolts)?

 

[Russell Buzz Buzz]

Have you done emissions with the hfc on the stinger? Also we’re you able to here the turbo “whistle” if you want to call it that through the exhaust with it installed and does the hfc come with any hardware (nuts/bolts)?

I never had mine done but if you ask around, I’m sure someone has. I was told you can pass emissions with HFCs but you would need O2 defoulers if you were fully catless.

Yes you can hear the turbos spool up.

Comes with the same hardware I received. 2 primaries, 4 bolts and 4 nuts. Everything you need to Install.

 

[Russell Buzz Buzz]

Have you done emissions with the hfc on the stinger? Also we’re you able to here the turbo “whistle” if you want to call it that through the exhaust with it installed and does the hfc come with any hardware (nuts/bolts)?

Asked today, HFCs will pass emissions and won’t throw any codes.

 

[G70LEbyAdoom]

I dont see a cost for the rear carbon piece. not the deck lid. the other one.

 

[Russell Buzz Buzz]

I dont see a cost for the rear carbon piece. not the deck lid. the other one.

The rear garnish sold and is not longer available.

 

[DiabloStinger]

Interested in the FMIC - PM sent

 

[DiabloStinger]

Won't let me message you - shipping to 80923 for the FMIC?

 

[XThunderStingerX]

Part out Sale: shipping not included. Located in Maryland

Ark Deck Lid CF spoiler (ceramic coated) - $750
JB4, Bluetooth, EWG wires- $600
BMS WMI stealth kit, 1 gallon tank, FSB module, BMs10 nozzle, solenoid- $600
NGT Hi Flow primaries (about 2k miles)- $750
WOT Box stage 2 launch controller - $175
BMS FMIC - $500
Filter relocation kit (custom 3d printed kit) - $100

Is the filter relocation kit available? & Do I have to modify anything in the front to install it?

 

[zdunkle7]

Part out Sale: shipping not included. Located in Maryland

Ark Deck Lid CF spoiler (ceramic coated) - $750
JB4, Bluetooth, EWG wires- $600
BMS WMI stealth kit, 1 gallon tank, FSB module, BMs10 nozzle, solenoid- $600
NGT Hi Flow primaries (about 2k miles)- $750
WOT Box stage 2 launch controller - $175
BMS FMIC - $500
Filter relocation kit (custom 3d printed kit) - $100

Have you sold the FMIC yet? I’d definitely be interested! Let me know

 

[zdunkle7]

Part out Sale: shipping not included. Located in Maryland

Ark Deck Lid CF spoiler (ceramic coated) - $750
JB4, Bluetooth, EWG wires- $600
BMS WMI stealth kit, 1 gallon tank, FSB module, BMs10 nozzle, solenoid- $600
NGT Hi Flow primaries (about 2k miles)- $750
WOT Box stage 2 launch controller - $175
BMS FMIC - $500
Filter relocation kit (custom 3d printed kit) - $100

Hi! I’m interested in the OCC, WMI Kit, and Filter Relocation Kit. Send me a message if any of those are still available!

 

[k8blackout]

Part out Sale: shipping not included. Located in Maryland

Ark Deck Lid CF spoiler (ceramic coated) - $750
JB4, Bluetooth, EWG wires- $600
BMS WMI stealth kit, 1 gallon tank, FSB module, BMs10 nozzle, solenoid- $600
NGT Hi Flow primaries (about 2k miles)- $750
WOT Box stage 2 launch controller - $175
BMS FMIC - $500
Filter relocation kit (custom 3d printed kit) - $100

Would you happen to have the file for the 3d printed intake relocation?

 

[zdunkle7]

Would you happen to have the file for the 3d printed intake relocation?

Is the filter relocation kit still for sale?

 

[RetroPetro]

If the HFC primaries are still around I’d be interested.

 

[Jxcruz]

Is the FMIC still available ?

 

[Ohiocruiser]

I would be interested in that deck lid. But looks like op hasn't been here in a while.