• PLEASE! It is VERY important that this area is not used for the discussion of technical issues with your Stinger. This section is for posting about regional-specific things like Stinger clubs, events, local vendor or dealer recommendations, KiaStinger.com member sightings, etcetera... In other words, I do NOT want people to need to scour through several different sections to find answers about their heads up display. That's why there's a section dedicated specifically to discussions like that. THANK YOU!
  • Car enthusiast? Join us on Cars Connected! iOS | Android | Desktop

Paddle shifters.

Tinter

Active Member
Joined
Oct 17, 2018
Messages
157
Reaction score
90
Points
28
Location
Ringwood, Melbourne
Have any of any you Aussie owners bought paddle shifters that I’ve seen for sale on K8 Stinger store?
Specifically what is the quality like, do the encroach on the instrumentation visually?
Any pluses or negs?
I’m looking at red purely for a visual enhancement.
 
Pretty good but they use a grub screw to hold them on so it may leave and indent if u take them off.
 
Last edited:
Pretty good but they use a grub screw to hold them on so it may leave and indent if u take them off.
Cheers for the heads up!
I wondered if this might be the case?
Are there any other alternatives out there in Stinger land that don’t do that?
 
Last edited by a moderator:
______________________________
I’ve had a bit of a search & by the looks of things there is only one style/brand.
 
Last edited:
From interior to exterior to high performance - everything you need for your Stinger awaits you...
I recently bought one from Korea as it was half the price compared to US.
you can either use the provided screws to mount them or you can use 3m double sided tape which isn't provided.
This basically is just visual enhancement like you said as pulling (shifting) on the lower/upper part doesn't really work well. it works well if you pull in the middle where the original shifter is.
 
I recently bought one from Korea as it was half the price compared to US.
you can either use the provided screws to mount them or you can use 3m double sided tape which isn't provided.
This basically is just visual enhancement like you said as pulling (shifting) on the lower/upper part doesn't really work well. it works well if you pull in the middle where the original shifter is.
Cheers and thx enormously for the feedback but that fitting and it’s perceived flimsy construction has sealed it for me.
 
Back
Top