No boost

bandz.shotit

New Member
Joined
Feb 21, 2025
Messages
3
Reaction score
0
Points
1
So I fixed my misfiring with new spark plugs and coil packs but now I am having an issue. When I do a hard pull and turbos have full boost the turbos cut out. When I press the gas I am getting no boost at all or any type of turbo spool. When I turn the car off the turbos start working again fine, I can press the gas normally and do slight pulls.
 
Your modded, so, the variables complicate any answer. Plug gap could be looked at. Over-boost is what it sounds like, because it resets when you turn it off.

What model year?
 
Maybe you have too much boost and not enough plug gap.....dunno, it's your tune
 
Do you have ewg wires with your jb4? Sounds like you overboosting since it resets after you turn car off and on. I assume you have the fuel wires hooked up as well. Mine are hooked up to the adapter so I don't have to puncture the oem wires.

With ewg wires hooked up to the wastegates you can adjust their adaptations ff to something like 45 or lower. That will stop the overboost. It definitely took care of it for me. Intakes with exhaust usually tend to cause overboost.
 
Last edited:
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Back
Top