Meguiar's Ultimate Fast Finish Sealant

[Clearly Canadian]

Found this interesting product. Have to admit it did significantly shorten the waxing/sealant process. However I don't have much experience overall so wondering if anyone else had tried it?

 

[KiaWill]

I use it on my work truck. It's also great for windshield treatment before rainy season. Easiest product I've used. Spray on microfiber towel, wipe on, and buff off.

 

[Revvdmedia]

I used it late fall since the weather wasn't consistently warm enough for me to get on an application of ceramic coating. It did what it says it should (hydrophobic properties) but I didn't notice much for gloss, but my car is white as well. I did notice it did nothing for keeping contaminants from sticking, I constantly had rusty orange spots on the paint from some sort of fallout. I've never had this problem when using ceramics, so I won't be using fast finish anymore, I'll be using ceramic coating as I had been moving forward.

 

[Clearly Canadian]

I used it late fall since the weather wasn't consistently warm enough for me to get on an application of ceramic coating. It did what it says it should (hydrophobic properties) but I didn't notice much for gloss, but my car is white as well. I did notice it did nothing for keeping contaminants from sticking, I constantly had rusty orange spots on the paint from some sort of fallout. I've never had this problem when using ceramics, so I won't be using fast finish anymore, I'll be using ceramic coating as I had been moving forward.

Sounds like you need to use some Iron-X. I'd do it before your next ceramic coating.

Those orange spots are probably rusting brake dust embedded in your paint. Iron-X dissolves it out.

 

[Revvdmedia]

Sounds like you need to use some Iron-X. I'd do it before your next ceramic coating.

Those orange spots are probably rusting brake dust embedded in your paint. Iron-X dissolves it out.

You are 100% correct and I've already used up the 1/3 bottle of Iron X I had laying around after the roads were cleaned. Before ceramic coating, my car will undergo the normal "all weekend" prep work, I have some light scratches to polish out, on top of proper prep including removing all the remaining contaminants and whatnot. I also have a few touch ups on the paint I'm finishing and the clear coat says to not apply "wax" for a month after application, so I don't think I'll be doing the ceramic for about a month from now.

As for the Meguiars, I still think it lacks the ability to repel contaminants. I would Iron X on my Mustang every year and never saw nearly as much purple as I saw on the Stinger. I mainly attribute that to either the brake pads on the Mustang created less dust, or the ceramic coating did its job and kept the dust from sticking to the paint and rusting.

 

[AV8R]

Used it, very good, nice shine, protects and seals, easy to apply.