Jb4 Tune done! Still have questions

[Yearofthecarrot]

Just finished with spark plug replacement and JB4 Tune. Also installed a catch can. Everything seems to be running well. Just pumped 93 octane and did a small 8 mile drive on Map2. Logs only showing a max 15psi boost so I think I’m missing something since I believe that’s in range of stock. It also seems that none of the gauges are working that I would assume would read from the OBD. Any help would be appreciated. Did I miss something? New to piggyback tuning. Excited to be a part of this community, any and all feedback welcome.

 

[AWDGT2]

Your log doesn't help, It only recorded boost and nothing else. This is an indication of an obd connection issue. Either it's not plugged into the cab side all the way, or you have the 4 pin on the JB side backwards.
Next, set your JB up to record at WOT, hitting that button and cruising around creates a HUGE log file with useless info. You can find that under app settings.

 

[Terry@BMS]

Check the OBDII.

 

[runner1]

You’re running map zero. Somethings not connected properly

 

[Yearofthecarrot]

Check the OBDII.

It was the plug at the tuner. Phenomenal product. I am in love with room to grow. Water/ Meth happening soon. Tires must come first though. I’m breaking loose at 50mph pulls and I don’t think that is normal lol.

 

[Yearofthecarrot]

Your log doesn't help, It only recorded boost and nothing else. This is an indication of an obd connection issue. Either it's not plugged into the cab side all the way, or you have the 4 pin on the JB side backwards.
Next, set your JB up to record at WOT, hitting that button and cruising around creates a HUGE log file with useless info. You can find that under app settings.

I had a busy few days. Thank you for the reply. Here as an updated log but I have since fixed the 4 pin which was embarrassing to discover and I figured out the proper line in the log to be looking at. I put an updated log though and would love any feedback.

 

[runner1]

What fuel is that?. In looking over it looks ok for map3

 

[Terry@BMS]

I had a busy few days. Thank you for the reply. Here as an updated log but I have since fixed the 4 pin which was embarrassing to discover and I figured out the proper line in the log to be looking at. I put an updated log though and would love any feedback.

Need a longer pull!