Intercooler, BOVs, Intakes AGENCY POWER / KHARTUNERZ

Dude you need to order from Nick at Khar Tunerz he would of taken care of you and that would of not happened....He would would have shipped a black ASAP lol...
Yeah, lesson learned. I'll get in contact with them, was hoping to install this weekend with pictures.
 
I just ordered AP black intercooler from Kharz . I have been waiting for it to come out. From the specs, it is larger than the Ultimate Performance intercooler
 
Here is some comparison for the OEM core and the silver agency core

IMG_5935.webp IMG_5936.webp IMG_5937.webp IMG_5938.webp
 
______________________________
Any comparisons with other after market intercoolers?

Currently out of CX racing but ill have another one of those soon
But havent gotten an Ultimate Performance in

Theres much more I would to do and to show you guys
But we arent exactly a huge operation with an endless bankroll
Luckily weve been trying as hard as possible to get companies to partner up so we can do these comparisons
Also a big thank you to anyone that purchases from us
Weve been putting all the money back into stinger products to try and get more information for you guys
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Currently out of CX racing but ill have another one of those soon
But havent gotten an Ultimate Performance in

Theres much more I would to do and to show you guys
But we arent exactly a huge operation with an endless bankroll
Luckily weve been trying as hard as possible to get companies to partner up so we can do these comparisons
Also a big thank you to anyone that purchases from us
Weve been putting all the money back into stinger products to try and get more information for you guys
Any numbers on this FMIC yet or how it compares to the UP FMIC?
 
Any numbers on this FMIC yet or how it compares to the UP FMIC?
I was wondering the same thing the UP looks biffier than the AP .... AP is reasonably cheaper thou
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Ultimate has some numbers the mfr claims. Can we get some from AP, please?
 
Just finished installing it, doesnt really fit without forcing it in or making some slight modifications to the plastic part that directs air as seen in one of the pictures where it's pulled down.20190126_101144_HDR.webp 20190126_095147_HDR.webp20190126_090922_HDR.webp
 
Last edited:
The wire parts of those clamps sit in a groove on the intercooler. I put some panel poppers in-between the clamp and the wire to hold it out of the groove while I pulled the intercooler off that clamp
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
The wire parts of those clamps sit in a groove on the intercooler. I put some panel poppers in-between the clamp and the wire to hold it out of the groove while I pulled the intercooler off that clamp
Do you have pics ? What panel poppers ? I think I have a boost and it’s from that clamp no sealing properly. I have removed my intercooler numerous times for dealer visit and recently went back to stock.
 
______________________________
You can use anything. I just had panel poppers near by. You can use folded over paper to hold the clips out of the groove. That side does not clamp down like the other side. It just sides in and those wires go into the groove which stops it from sliding back out. since you have removed it a couple times. I would check the clamp just up from that junction
 
You can use anything. I just had panel poppers near by. You can use folded over paper to hold the clips out of the groove. That side does not clamp down like the other side. It just sides in and those wires go into the groove which stops it from sliding back out. since you have removed it a couple times. I would check the clamp just up from that junction
Ok thank you sir. I am not building boost and is freaking me out I need to get tot he problem ASAP.
 
Thoughts on the agency power intake vs Stillen?
Agency install wasn't a smooth one... Having followed the steps from their website a few issues arise. Passenger blow off hose is too long once reused, intake pipes do no square up to airbox, no lower driverside fitting that fits in that pipe location needs some customising the stock one, and last the filters will not stay clamped on the pipe. I have a 21 model and can't see any visible differences in model years for fitment so I would rate a 5 outta 10 this far
 
Kia Stinger
Back
Top