How to calculate overboost on map 3

[StingerScott]

When looking for over boost in a log, am I adding the ecu psi(say 13), and target(6.0) and then aligning it with the actual boost I had like in the log I attached? Or am I way off, is this log ok in that sense? Thnx

 

[StingerScott]

here is what I found if anyone new to this is wondering how to calculate overboost,

1. Look at “ECU_PSI” (real boost) in your log.

2. Find “DME_BT” (target boost) for the same RPM.

3. If ECU_PSI is more than 2 psi above DME_BT, it’s overboost.


Example: If DME_BT is 17 psi and ECU_PSI is 20 psi, that’s 3 psi over—overboost.