HKS Plugs Gap

[MikeDebolt]

Do the Plugs come pre gapped out of the box for what they recommend for the JB4.
I hope so. Because I installed them and stupid me did not check them prior to putting them in.

 

[Spaceme17]

Doubtful. Do you really want to run your car and not be sure about the plugs? Its worth the time to take them back out and check them.

 

[RingStingerGT]

What do the HKS need to be gapped at?

 

[exounx]

It has been difficult to find exactly what they should be gapped but the range I've found is .022"-.026". Most people seem to do .024". I went ahead and did .022" and have been running JB4/map5 much better than my gapped stock plugs. I would recommend getting the 14mm BMS Billet Spark Plug Gapper with the feeler gauge.

 

[monusa]

I have the HKS for the 2.0T and .022 was recommended. .024 should work but like "Spaceme17" says, you don't want to install them without the proper gap......m-i-s-f-i-r-e......not good. if you have the 3.3, gap should be about the same. Gap tool is makes it easy

 

[RingStingerGT]

What should the gapping be for the HKS plugs on a 3.3T? I have the GT2