ewg wires. has this happened to anyone else?

[SIMONGUEY]

yeah if the clip is broken . toss a zip around the 2 to hold it in place and make sure the wire from the jb4 is connected properly and securely

man i hope this solves my problems! i just want to turn on my car without having to delete any code lol! i want to buy a cpi kit next once I fix current problems.

 

[Terry@BMS]

Now you have o2 sensor faults. Maybe faulty adapter or wire installed on the wrong position. Try disconnecting fuel wires all together, clearing codes ign on, engine off, to see if faults remain off. If not then maybe faulty o2 sensor.

 

[SIMONGUEY]

Now you have o2 sensor faults. Maybe faulty adapter or wire installed on the wrong position. Try disconnecting fuel wires all together, clearing codes ign on, engine off, to see if faults remain off. If not then maybe faulty o2 sensor.

going to give this a try. hopefully it's just the fuel wires! that's an easier purchase and fix.

 

[SIMONGUEY]

giving what terry said a shot this weekend! going to buy a dsub tool today and fully reinstall fuel wires, reposition them and then test out the car. thankfully now after buying the new chip I now only have one fault code instead of a couple so I am happy about that!

 

[Terry@BMS]

I asked you to disconnect the fuel control wires/adapters from the oxygen sensor to confirm whether your issue is being caused by those connections.

Don't remove the fuel control wires from the JB4 harness using a dsub removal tool unless you positively confirm one is placed wrong. It's quite easy to break things on the harness if you haven't used those tools before.

 

[byebyeSTI]

I asked you to disconnect the fuel control wires/adapters from the oxygen sensor to confirm whether your issue is being caused by those connections.

Don't remove the fuel control wires from the JB4 harness using a dsub removal tool unless you positively confirm one is placed wrong. It's quite easy to break things on the harness if you haven't used those tools before.

he is not listening to us terry ,,,,

 

[SIMONGUEY]

oohhhhhhhhh ok, that makes a lot of sense then lol.

would I need to turn anything off on my jb4?

if not ima just unplug my car and then unplug the fuel wires and see what's up.

 

[SIMONGUEY]

So I removed the fuel wires. And everything started working perfect! Going to buy me some fuel wires now! How do I go about removing the wire? Do I just leave it alone and slice the wires?

 

[Terry@BMS]

No idea what you've got. Photos?

 

[SIMONGUEY]

No idea what you've got. Photos?

One of the connections for the fuel wires was loose. Basically fell apart once I gave it a tug. Just going to buy new fuel wires I’m pretty sure that was the problem!

 

[SIMONGUEY]

No idea what you've got. Photos?

Appreciate the help terr!