Evc catback system and cf decklid group buy

Status
Not open for further replies.
So let’s say someone here orders through you… and there are figment issues or damage? How would that be rectified? As this is a mystery vendor/company?
All orders have insurance and I would take the hit and cover until they finish their claim on their end with frieght company. Also if any incidents were to occur I would ask for compensation back or I can open a dispute with my bank/PayPal for a much faster solution.
 
Also they have our exhaust molding already so fitment isn't an issue. If this was a brand new company that attempted it for the first time I can see especially in the case of quicksilver.
So let’s say someone here orders through you… and there are figment issues or damage? How would that be rectified? As this is a mystery vendor/company?
 
Another thing I am asking the manufacturer is to send me a surplus amount of the wiring and signal box cause I'm not waiting a month to warranty wires or any electrical issues.
 
______________________________
More manufacturer photos. As you can see it comes without any branding. If you want the manufacturers initials we can do that, but for me I prefer a clean look. This is the ss304 and they can design it however you wish as far as muffler placement and resonators go.
 
Last edited by a moderator:
design wise the titanium will look like what I first posted but this is another example of one made for the stinger.
 
Last edited by a moderator:
From interior to exterior to high performance - everything you need for your Stinger awaits you...
KIA STINGER 3.3tt GROUP BUY TITANIUM OR SS304 EVC CATBACK



STEP #1:


-50% deposit to be received by the company to start production. ETA for completion 7-20 days pending if we have 5 orders or 10 orders etc.
-The remaining balance will be paid once production is complete and the order is packaged and ready for shipment.

STEP #2:
-Updated production complete. QC + photos will be sent soon.

STEP #3:
-Production is just about to be complete. Products getting cleaned and packaged for shipment. All members of the Group buy will be notified and will receive photos of the exhaust.
Other half of the payment would be due. Awaiting shipment.

STEP #4:
-Once the shipment is here, it'll need to clear customs before I can pick up the package. Looking around 4-6 weeks estimated via boat due to the current port situation. Will keep everyone updated every other week until it arrives.

STEP #5:
-Cargo lands at the port..once customs clears the package it'll be on its way from there.
The final step would be to ship directly to you guys

The purpose of this group buy is for people who want something nice and be able to control the valves when you need it to be quiet vs all out loud. By giving this group-buy deal you would save compared to what each individual set runs for. Due to current material pricing and freight costs, it would be $4000 shipped plus import duty fees while the SS304 is $2800+fees. The current manufacturer makes high-end exhausts for all makes. Currently, this is for the Kia Stinger 3.3l. I have contacted offices in both Korea and China to make this possible. Titanium is significantly lighter and stronger than SS304 so that is one selling point and why I've decided to make the switch myself. The fastest stinger needs the best of the best which includes weight reduction especially when it comes to the exhaust.

Material options: SS304 or Titanium
Can be resonated or non resonated no extra fee

The price for Titanium is $3100 shipped ($4000 MSRP)
The price for SS304 is $2100 shipped ($2800 MSRP)

If there are 10+ orders of either or the discount would be an additional $200 off (TI $2900& SS 304 $1900)
Paypal, CashApp, Bank transfer/wire, or cash option for locals.if that's easier
I do not have any photos of the exhaust, but it is the factory that shares similarities with RES, GT9, FI, TUBI, etc so the quality is without a doubt good.
I will process orders of 5 or more for the exhaust so less wait time and to not make others wait forever. The evc exhaust group buy can be either material please state material when messaging me along with resonators or no resonator option.

The cf Decklids will have a round version and a curved sharp version. $600 shipped to your door and if we have 5+ orders for that it's another $50 off.
Serious inquiries and half of the payment are due when the group buy closes in March while the other half is due before package ships.


Currently, have 3 people in line for this exhaust group buy outside this forum. Once the first 5 people are ready I'm processing the order that way the first 5 can get it made sooner.
1. Myself
2. Andrew
3. Nathan M
4. John S.
5.
6.
7.
8.
9.
10.
 
No the exhaust is straight from the manufacturer. Those were just some examples of the stinger molds they have. But the last kit I posted showing the whole exhaust is the finalized design for this group buy
 
Hence why I ordered mine first and if others are interested after seeing the exhaust installed along with sound clips I could ask them to make more. I'm taking the hit by getting only one shipped to me vs having batches of 5
 
So you’re basically buying from Alibaba right?

Check out this product on Alibaba App Performance titanium valved exhaust catback system for kia stinger exhaust
Alibaba Manufacturer DirectoryView attachment 67364
Check out this product on Alibaba App Carbon Fiber Rear Trunk For Kia Stinger Boot 2016-2019
Alibaba Manufacturer DirectoryView attachment 67363
It's funny how you think the first and only place I checked was Alibaba I don't need a translator for that nor research. Alibaba also charges service fees along with expensive ass shipping much more than talking to the manufacturer themselves or using a freight forwarder.
 
______________________________
From interior to exterior to high performance - everything you need for your Stinger awaits you...
What if I just wanted an axle back made can that be done? it wouldn’t necessarily be for a stinger it would be for my g70 3.3t so it would just be dual tip instead of a quad tip
 
I can ask but as long as they have the mold I believe they should be able to accommodate. You need the valves correct? Or without.
What if I just wanted an axle back made can that be done? it wouldn’t necessarily be for a stinger it would be for my g70 3.3t so it would just be dual tip instead of a quad tip
 
I can ask but as long as they have the mold I believe they should be able to accommodate. You need the valves correct? Or without.
Without valves preferably…. I just need the axle back portion if that’s possible already have
mid-pipe/secondary/hfc …. If you can get me a price for both materials that would be great
 
Without valves preferably…. I just need the axle back portion if that’s possible already have
mid-pipe/secondary/hfc …. If you can get me a price for both materials that would be great
Hmmm it might be cheaper to buy that from eBay. I think parts combined is their name but I believe they sell Jun bl axle without valves for 1k? I'd double check there first
 
I
Hmmm it might be cheaper to buy that from eBay. I think parts combined is their name but I believe they sell Jun bl axle without valves for 1k? I'd double check there first
I’ve only seen them with the quad tips I just need dual I’m not opposed to being evc axleback if the build quality is nice
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
I believe the stinger axlebacks all fit g70s if it's just mufflers back. Another option for you is either valvetronics from valvetronics USA or just find a muffler you like depending on if you want loud or tamed sounds. Valvetronics is around $699 for mufflers only with valves and has single exit.
I

I’ve only seen them with the quad tips I just need dual I’m not opposed to being evc axleback if the build quality is nice
 
______________________________
I believe the stinger axlebacks all fit g70s if it's just mufflers back. Another option for you is either valvetronics from valvetronics USA or just find a muffler you like depending on if you want loud or tamed sounds. Valvetronics is around $699 for mufflers only with valves and has single exit.
Ended up just buying the set of valvetronic mufflers hopefully I can find a decent shop here in central texas to possibly fabricate an axle back exhaust and possibly a mid-pipe if I don’t like the way it sounds
 
Ended up just buying the set of valvetronic mufflers hopefully I can find a decent shop here in central texas to possibly fabricate an axle back exhaust and possibly a mid-pipe if I don’t like the way it sounds
I highly recommend buddy's mufflers north of Austin. He made me an incredible varex setup that I LOVE.
 
Status
Not open for further replies.
Back
Top