• Click HERE to ask your JB4 Question!
  • Car enthusiast? Join us on Cars Connected! iOS | Android | Desktop

Driving then complete boost loss

Reldas

Active Member
Joined
May 30, 2019
Messages
275
Reaction score
167
Points
43
Was driving and doing some pulls and then sudden boost loss, if you look at timestamp 1632 thats when it happened and i no longer have boost. Only mods i have are BMS intakes.

EDIT: i have attached new log since i did some pulls after work and it seems fine but a check would be great when you get the chance @Terry@BMS
 

Attachments

Last edited:
started at around timestamp: 1536...........

May want to send this to Terry@bms. If you shut the car down and re-started, did it recover?
 
started at around timestamp: 1536...........

May want to send this to Terry@bms. If you shut the car down and re-started, did it recover?
yes it did, car runs fine now. did some pulls and no issues. I think my wastegate was stuck open due to having the "lagfix" set to 80. I cleared that and everything seems fine. Hopefully Terry sees this post, otherwise ill post it on the other forums.

Why do you think it started at 1536?
 
______________________________
Why do you think it started at 1536?
That is when I saw boost first disappear.......jb4 was still "targeting" boost but ECU was not having none of it......what map you running?
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
your hp fuel is 10 and steady but your trims peg 50 steady most of your run. go into jb4 and look for the last safety it tripped for
 
______________________________
From interior to exterior to high performance - everything you need for your Stinger awaits you...
settings, view jb4 tuning, user adjustment and go to the bottom. it says 0?
 
This is my first map 2 log that i did a little while back, only difference is that i have installed the BMS intake.
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Back
Top