Does anyone know if 19x11 will fit as rears? 2018 Stinger GT2

Schmidt

Member
Joined
Mar 26, 2022
Messages
31
Reaction score
3
Points
8
Thinking of picking up some rims. The front is 19x8.5 with 37 offset and the rear is 19x11 with 45 offset. Will this work?
 
The fronts will fit.

The rears will NOT fit.

Check my sig, and I'm running 19 x 10.5 x 45, and they are right at the lip of the rear fender.

With your proposed 19 x 11 x 45, that will be another 6.25 mm, or, a quarter inch sticking out past the lip, thus too wide.

Maybe if you can get the wheel with an offset of 50 it will work. Or, go 19 x 10.5 x 45.

Here's the best picture I can find of mine for sizing:


20220423_105454.jpg

Not sure why it's sideways...

20220827_174328.webp
 
Last edited:
Thanks SRV! So if they were to maybe fit...they would need a greater offset. I think the seller said the rears were 45. I thought it might be a stretch. I have found some that have done it during a simple google search but not enough info for me to drop 2500 on a set to find out they dont fit.
 
______________________________
Thank you. :)

Post some links at what you're looking at.
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Here's the best picture I can find of mine for sizing:
lol, you need a shot from the rear, since this is about fitting rear wheels. go out and take a hard down the side shot from the rear, you're doing it for the team.
Not sure why it's sideways...
I read a while back that if you resize the photos before uploading them here that they will post in the attitude that you flipped them to.
 
Your help is greatly appreciated! I am also looking at these...https://offerup.com/item/detail/1257e7d5-81d6-3e73-8115-beec35c2feb9?q=rays+wheels

Any advice?
 
I was able to answer your first question confidently since their specs are so close to mine.

However, now you'll need this tool to help you with your fitment:


Plug in the stock wheel and tire sizes, then your new ones, and then look at how they'll fit relative to the originals - it's a really nice tool.

You can also do a search, there is a huge wheel/tire thread with fitment, etc. Plus maybe some of the guys will chime in with their experiences too.

No matter what, be patient.
 
So the Aodhan might be a good choice or the Ray's G-games?

The Aodhan have like 2.5" lips which made me wonder and then had 35+ front and 30+ rears I think. There is descrepency in the listing. One area it says 35+ for both but then the ad saids 30+ rear.

I will mess around with that wheel offset calc. Thanks for sending that!
 
______________________________
From interior to exterior to high performance - everything you need for your Stinger awaits you...
I am not sure I am looking at the right things but on that website it seems that both would work.

Original is stock at 225/40 R19, 8.0 +40 and 255/35 R19, 8.5 +46.5

Hoping to use the same tires on the new set up so for the Aodhan (first link):

225/40 R19, 8.5 +35 and 255/35 R19, 9.5 +30.

Really the only difference it seems would be 0.5 wider wheel in the front with 5mm less offset and 1.0 wider in the rear with 16.5 mm less offset.
 
Actaully...I think I like the Aodhan DS08. It seems to me that both my tires would fit on the rims and the wheel would fit in the spaces. Hopefully someone will chime in....thanks SRV!! The look you had going in the pictures is the where I would like the tires to sit. Wondering if with this set up the wheels will look as agressive as I am looking for. Wish they made the rears in 10" vs 9.5"

19x8.53522.442.16"
19x9.53523.222.5"
 
Last edited:
Your listed stock front offset is incorrect.

Stock wheel offsets:
19 x 8.0 +34
19 x 8.5 +46.5

Plug those numbers in and recheck.
 
Now I am more confused lol...wondering if I should go with less offset than 35. I emailed Aodhan. Maybe they have software they can run....
 
Your listed stock front offset is incorrect.

Stock wheel offsets:
19 x 8.0 +34
19 x 8.5 +46.5

Plug those numbers in and recheck.
I am not really sure what I am checking I guess. In some cases it shows 0.47" further away and out...I suppose I should go measure where the tire is at reletive to the fender. But then I start thinking about the brakes..,..
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Looking at the spreadsheet I have it looks like for the front maybe et 35 or 30 leaning towards 30 and for the rear 30 or 22? If I went with 35 on the front and 30 on the rear then later I could get wider tires to mount and the face of the wheel would be the same correct?
 
______________________________
Ok SLV so looks like your set up was 0.56 closer to inner on rears and 0.64 further out.

on my proposed rear of +30 offset 1676998281936.webp
 
I think that if you go an inch wider in the rear and change the offset from 46.5 to 30 you will rub, at least when cornering hard. someone confirm or refute. as stated by @SRV , the oem front offset is 34 not 40. going a half inch wider you probably don't want to reduce the offset but could increase it to maybe 40.
 
Confirmed with manufacturer that the spoke would not clear the calipers.
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Back
Top