Great video Vivid, I’ve been meaning to install my DRL switchbacks..definitely going to follow your install tips.
 
great vid. I'm really enjoying your channel!
 
______________________________
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Thanks for the heads up @Ozstung, was going to watch it the other day but had to go out and lost the thread .
 
Quick Clarification on the installation procedure.

The CK71 DRLs ship with all required connectors to make installation as seamless as possible. There is NO need to add wires or buy any additional connectors. The length of the DRL kit is plenty to allow for testing, after plugging in the DRLs, with the bumper off.
It is also recommended to remove the front bumper in order to make the mounting of the DRLs in the vents easier for you.
 
Hey can someone who has done this and knows the wiring well please give me a call. Think I have tapped into the wrong wire somewhere. Thanks
Todd 251-747-4775
 
______________________________
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Thank you to Jesse Debars. He sent me the correct diagram and I got them working.
 
Question: what gauge wires did you use to splice in the DRLs into the headlamps? Thank you!
There’s really no need to do that step...the provided wiring has enough slack to connect and move the bumper back and forth before clipping it back into place.
 
Back
Top