Sold BMS intakes 3000 miles on them

DiabloStinger

1000 Posts Club!
Joined
May 16, 2018
Messages
1,072
Reaction score
305
Points
88
Location
Colorado Springs, CO
BMS intakes for sale. Newer dry flow filters with about 3k on them (probably less as I don’t drive the car much).

Will throw in the plugs to cap off your recirculating hoses from your BOV if you want more noise. They are definitely worth $250 themselves

***SOLD***
 

Attachments

  • IMG_2146.webp
    IMG_2146.webp
    256.1 KB · Views: 8
  • IMG_2147.webp
    IMG_2147.webp
    281.8 KB · Views: 8
  • IMG_2148.webp
    IMG_2148.webp
    311.9 KB · Views: 8
Last edited:
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Thanks for packing it so well! Got them on and they sound sweet! I didn’t put the plugs on bc I wasn’t sure if it hurt it or not. But you have to cap them when ppl install BOVs. But would it affect HP in a negative way? Thanks again!
 
Thanks for packing it so well! Got them on and they sound sweet! I didn’t put the plugs on bc I wasn’t sure if it hurt it or not. But you have to cap them when ppl install BOVs. But would it affect HP in a negative way? Thanks again!
There is no negative effect from capping those when you use a vent to atmosphere setup, like with aftermarket bov. It is just a personal preference either way. I’m glad they sound amazing.
On aftermarket valves you might be able to hold more pressure than the stock ones but that would be a marginal amount and you wouldn’t likely notice any difference.
 
Back
Top