I'm having some issues with continuing to foul / blow spark plugs with JB4 in Map 2 mode. I've had no issues for about 5 thousand miles after installing JB4 and the current mods listed below.
My current mods are:
JB4 in map 2 mode
Downpipes/ midpipes
Catback exhaust
Intake
Lozic TCU
Denso spark plugs gapped to .022
It first started when I had some misfires when using boost. It seems to drive fine when not pushing the boost too much. 2 of the plugs were fouled. They were replaced. It ran fine again but then almost immediately blew another plug. All of the plugs were replaced again, and within no time misfires started again.
I've done some reading and I've seen some suggestions to replace the coil packs, and also to use HKS plugs and possibly change the gap distance again. It seems to be an issue related to JB4, but it's confusing because it ran fine for a while, and doesn't make sense why it happens even after replacing the plugs.
Any ideas?
My current mods are:
JB4 in map 2 mode
Downpipes/ midpipes
Catback exhaust
Intake
Lozic TCU
Denso spark plugs gapped to .022
It first started when I had some misfires when using boost. It seems to drive fine when not pushing the boost too much. 2 of the plugs were fouled. They were replaced. It ran fine again but then almost immediately blew another plug. All of the plugs were replaced again, and within no time misfires started again.
I've done some reading and I've seen some suggestions to replace the coil packs, and also to use HKS plugs and possibly change the gap distance again. It seems to be an issue related to JB4, but it's confusing because it ran fine for a while, and doesn't make sense why it happens even after replacing the plugs.
Any ideas?