sdstinger
Member
- Joined
- Apr 3, 2022
- Messages
- 45
- Reaction score
- 27
- Points
- 18
Hi,
I installed the Jb4 package (cold air intakes, spark plugs, Jb4 etc.) and my 0-60 changed from 4.85 pre-chip to 4.78 on map1 measured on a draggy. Does that sound right? Can only do map 1 bc only have 91 octane available here.
The log had tons of information so I moved some of the pulls to this spreadsheet. I don’t know how to read it well but according to some of what I read, my car is all messed up, like ign 1 drops to 0 mid pull or goes up or down more than 3-5. Then in Ign 2-6 I’m getting numbers up in 7’s, 10’s etc. when it should be under 3 or something.
I’m a newbie and would really appreciate someone taking a look and telling me if my cars ganna explode or it’s just some normal stuff or do I need to take it to a shop? Why is the Jb4 only giving me that much gain? Is .07 seconds 0-60 all I’m ganna get on map 1?
docs.google.com
Thank you for any help!
Michael
I installed the Jb4 package (cold air intakes, spark plugs, Jb4 etc.) and my 0-60 changed from 4.85 pre-chip to 4.78 on map1 measured on a draggy. Does that sound right? Can only do map 1 bc only have 91 octane available here.
The log had tons of information so I moved some of the pulls to this spreadsheet. I don’t know how to read it well but according to some of what I read, my car is all messed up, like ign 1 drops to 0 mid pull or goes up or down more than 3-5. Then in Ign 2-6 I’m getting numbers up in 7’s, 10’s etc. when it should be under 3 or something.
I’m a newbie and would really appreciate someone taking a look and telling me if my cars ganna explode or it’s just some normal stuff or do I need to take it to a shop? Why is the Jb4 only giving me that much gain? Is .07 seconds 0-60 all I’m ganna get on map 1?
Car JB4 Timing
Sheet1 timestamp,rpm,ecu_psi,target,boost,pedal,iat,fuelen,wgdc,throttle,fp_h,ign_1,avg_ign,calc_torque,trims,dme_bt,meth,fp_l,afr,gear Firmware,Interface,JB4_MAC_Address,TMAP_V,Learned_Ign,DWP,MethTriggerMode,FF,MethSafeMode,MethAdd,MethScale,MethPSI,VIN,E85_Setup,VFF_Offset,fuel_30,fuel_35,fue...
Thank you for any help!
Michael
