• Click HERE to ask your JB4 Question!
  • Car enthusiast? Join us on Cars Connected! iOS | Android | Desktop

Nitrous pop some banks

Fl stingergt

Stinger Enthusiast
Joined
Mar 1, 2018
Messages
814
Reaction score
153
Points
43
Is there anyway for a more pops and bangs map for the JB4 platform.also want to ask terry what you think about adding small shot of nitrous to JB4 platform.
 
Anyone out there tryed nitrous on car yet . Like 50 to 75 shot for wot work.
 
The title, lol. :D Is a good example of doublespeak gibberish.
 
______________________________
Don’t know if serious haha. Haven’t heard nitrous since fast and furious days.
 
Last edited:
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Let’s see a small shot of nitrous will cool charge twice has much as water meth. To stop Detonation. That’s your flaw with fast and furious comments. Do some research into what Nitrous really does . Cools intake temps to run more compression. Timing, boost. Ya if you go g crazy with over doing it . Boom. But lots of guys use on turbo for cooling and turbo lag purposes. So it was just a thought. Thanks for the cracks.
 
So Nitrous on these platforms is unlikely (but possible) The challenges are Wet or Dry? and timing. Any car, even an N/A one, needs to be tuned for nitrous (timing retarded). It's not that simple with this computer on wheels. Very few people, if any, can just flash a Stinger tune race ready for a 75 shot. That means things are going to get hurt. If it's wet, then it will throw off the O2 sensor and weird things will happen. Rumors are that Tork did it but totally unconfirmed, if it worked, he would be touting it and even marketing a kit of sorts. And if it was tried, it was a failure because he would be touting it and marketing it.... get it?
 
Cool good answer. Compared to some of these trolls on here. Thanks
 
______________________________
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Hey ...
 
FB9BF407-4F13-4242-AB4F-7938013946B5.webp
 
So Nitrous on these platforms is unlikely (but possible) The challenges are Wet or Dry? and timing. Any car, even an N/A one, needs to be tuned for nitrous (timing retarded). It's not that simple with this computer on wheels. Very few people, if any, can just flash a Stinger tune race ready for a 75 shot. That means things are going to get hurt. If it's wet, then it will throw off the O2 sensor and weird things will happen. Rumors are that Tork did it but totally unconfirmed, if it worked, he would be touting it and even marketing a kit of sorts. And if it was tried, it was a failure because he would be touting it and marketing it.... get it?
Question I have hfc from sixth element. But have not put on yet. Was it worth power output and did u get cel .
 
It gained a 1/10th and there's more to come, and no CEL
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
It gained a 1/10th and there's more to come, and no CEL
Was it a major deal to switch out dp . People are saying bolts are breaking on turbo flanges and having to be drilled. I have pretty much everything done to car . That’s the last thing I’ve been holding off on.just trying to get input before diving in. Thanks
 
______________________________
Ok, so if your going to do this please heed my advice. Aside from the fact the Kia over torqued them there a bigger challenge. They used stainless instead of a carbon based stud and bolt. That's not a good thing!!! Google galling if you don't know what it is. That's why people are breaking bolts. If stainless gets any type of heat differential between the two pieces they will freeze together. So.... Spray them the day before, then again, then again. Loosen slowly, stop, spray, loosen a bit more, stop, spray.. get it?
 
Ya that’s why I was asking. If it’s even worth the few extra Hp for the headache. I’ve had a few guys look at it . They don’t want to even bother with it. I talked to another stinger owner he broke the ear off the turbo flanges on both sides.
 
Back
Top