Had Denso 5346 IKH24 that i got with the JB4 kit over 10,000 miles ago. my startup has been very rough so i changed the plugs to Denso 5346 IKH24 that i got from amazon, gapped them to the same .022 and now the car has no power. tried a few 0-60 with launch control, and it takes over 6 seconds to get there. Gas is no different, been using 93 from the same place I have been getting gas since i got the car a year ago.
When I took out the plugs that have been used for the last 10,000 miles they were now gapped at .024 and we originally .022. i'm thinking about putting those back in and see if i have power again. Other than that would could be the issue?
I know these logs aren't much, but hopefully it can show something
When I took out the plugs that have been used for the last 10,000 miles they were now gapped at .024 and we originally .022. i'm thinking about putting those back in and see if i have power again. Other than that would could be the issue?
I know these logs aren't much, but hopefully it can show something

