Running Map 5-7 with Bolt-Ons and 93 Octane?

[Kyle Vallade]

Just installed my JB4 + Fuel Wires today. Ordered my Denso's so I'm waiting on those to come in before I start running any high maps. That said, I have ran Map 1 out of curiousity and felt a significant increase. I disabled the JB4 altogether until I receive my new plugs. I have many bolt-ons currently; to include intakes, full exahust + Downpipes, Catch Cans (If those matter) along with some other bolt ons. I am curious if these might enable to me to run Map 5-7 after I install the new plugs?

I only ever run 93 Octane and occasionally dump some Octane Boost.

 

[Terry@BMS]

You'll need higher octane for map5, like 93 with good octane booster. But with the bolt on mods always best to look at your data and go from there.

 

[Kyle Vallade]

You'll need higher octane for map5, like 93 with good octane booster. But with the bolt on mods always best to look at your data and go from there.

I appriciate the reply! So definately nothing higher than 5? I always run 93, and I pour some booster in occasionally.

 

[Kyle Vallade]

I'm still learning exactly how to read what I'm looking at on the software haha. This was just from running on map 1. But I was also sort of going off what was on the initial JB4 Instruction Posting haha

 

[Terry@BMS]

Log is a CSV file, you'd need to attach that if you want me to check it out.

 

[Kyle Vallade]

Log is a CSV file, you'd need to attach that if you want me to check it out.

Ok, I'll do it all when I get my new plugs done and put it on the Dyno! Thank you!

 

[zbc1969]

Log is a CSV file, you'd need to attach that if you want me to check it out.

How do I send you my csv files to make sure I'm ok running map 2?

 

[xot1]

Just installed my JB4 + Fuel Wires today. Ordered my Denso's so I'm waiting on those to come in before I start running any high maps. That said, I have ran Map 1 out of curiousity and felt a significant increase. I disabled the JB4 altogether until I receive my new plugs. I have many bolt-ons currently; to include intakes, full exahust + Downpipes, Catch Cans (If those matter) along with some other bolt ons. I am curious if these might enable to me to run Map 5-7 after I install the new plugs?

I only ever run 93 Octane and occasionally dump some Octane Boost.

What booster?

 

[Terry@BMS]

How do I send you my csv files to make sure I'm ok running map 2?

Just post to the n54tech Stinger support forum. I check that thread most often. You can also email in to support@burgertuning.com.