3.3TT Creating True Plug-N-Play JB4 Harness (w/Fuel Wires)

[ecko04]

UPDATE

Wire loom will come on all harnesses at no additional price. This should ensure that a nearly factory look and finish.

I’ve been receiving your messages, through the thread and PM, and I see your interest. Once I get caught up on a few lingering things in the next day or two, I’ll begin reaching out to setup orders. Still looking at an ETA to begin shipping next week.

 

[ecko04]

I may even give you some color choices for wire loom as recommended by my guy @MrSmoofy

I have standard black expandable loom and I have red with black split loom already in my office. I should have a sneak peek at the red with black by Thursday or Friday.

I’ll look to source some blue with black split loom next week.

 

[Username not found]

I may even give you some color choices for wire loom as recommended by my guy @MrSmoofy

I have standard black expandable loom and I have red with black split loom already in my office. I should have a sneak peak at the red with black by Thursday or Friday.

I’ll look to source some blue with black split loom next week.

Dodger Blue right?

 

[turboAWD]

Any pics of loom colors? I'm getting ready to pull the trigger soon, probably - just bought a jb4. Although I won't need it for another 3-4 weeks, probably..

 

[ecko04]

Any pics of loom colors? I'm getting ready to pull the trigger soon, probably - just bought a jb4. Although I won't need it for another 3-4 weeks, probably..

I’m disappointed in you...

2 posts up - “I should have a sneak peek at the red and black by Friday.”

The black has been pictured in previous posts.

 

[turboAWD]

I’m disappointed in you...

2 posts up - “I should have a sneak peek at the red and black by Friday.”

The black has been pictured in previous posts.

My bad - I thought you had a specific product in mind already, just hadn't received the order / confirmation yet..

 

[Bonsai]

I am up for a set if there will be any left over from previous people. Is there a list? Or just send a PM? I already have the fuel lines installed with the positaps, but I wouldn't mind switching to plugs if able to. Would make uninstall/reinstall much easier when going to the dealer.

 

[ecko04]

I managed to get things moved along a little sooner than expected.

Here's a prototype of what will be made. I did not add the braided heat sleeve to these, hence why they are prototypes.

• The JB4 fuel wire harnesses will have 3" of wire to ensure they add no clutter to the engine bay.
• Each harness will include braided heat sleeving
• Each harness will arrive with two heat shrink wraps and two heat solder tubes
• Each harness will have a single wire lead that you will attach to your current fuel wire.
  • You will slide the heat shrink wrap onto one the fuel wire
  • You will then slide the heat shrink tube onto the the same fuel wire
  • You will twist the two wires together as shown below

• You will then slide the solder sleeve over the wires you just twisted. Try to ensure the solder band (shown in silver) is in the middle of the wires.

• Apply even heat, with a lighter, to the solder and silicone bands. Direct heat is not needed. You don't need a lot of heat nor does the lighter need to be too close to the connection.
• Slide the heat shrink tube over the soldered connection and apply heat.

That's it! Plug the harness in.

 

[ecko04]

I ordered materials to make 15. I have a target ship date of Friday 8/2.

1. @Jeaddi
2. @robz32
3. @JP's_Stinger
4. @soulevo8
5. @Lord3Putt
6. @Bonsai
7. @Username not found
8. @Cooshman
9. @Metalmania82
10. @asciidic
11. @turboAWD
12. @bcterp
13. @SteveCo
14. @Buzzrush

I will send information for payment by the end of the day on Sunday July 28th.
I'll continue to take names and PMs from those who are interested.

I'll send you at least two messages regarding payment. If it isn't received, i'll move to the next person. Depending on demand i'll order supplies for subsequent batches.

Cost - $55 + $8 shipping (Lower 48 via USPS Priority w/ Insurance + Delivery Confirmation)

If you pay via PayPal, we'll need to add $2.13 to cover PayPal seller fees. I'll try to think of another payment method that won't charge fees as I know everyone is not comfortable sending funds as a gift or friends/family.

 

[turboAWD]

Price is still $55 + $8 ship? I'm in..

 

[bcterp]

Add me to the list please.

 

[SteveCo]

I'll take one as well - PM sent.

 

[ecko04]

@turboAWD, @bcterp and @SteveCo aded to the list

Assuming everyone on the list pays, I have 2 slots remaining in the first batch of 15.

If you plan to pay via PayPal, please ensure that your shipping address in PayPal is confirmed and correct. I will only ship to the confirmed shipping address.

 

[Username not found]

Oh man I'm excited! Do you have Venmo, Zelle or Cash App? I'll send the money whichever way is easiest for you.
Also does this include the Dodger Blue braided sleeves or just black?

 

[ecko04]

Also does this include the Dodger Blue braided sleeves or just black?

I don’t know what a dodger blue is — just black at this time.

 

[Username not found]

All good. You were saying earlier that you were thinking about making some with blue or red strips. That's what I was referring to.
I just call every blue Dodger Blue.

 

[Buzzrush]

Any room left on the list Ecko04? I'm very interested! Great work!

 

[ecko04]

All good. You were saying earlier that you were thinking about making some with blue or red strips. That's what I was referring to.
I just call every blue Dodger Blue.

Oh ok. I need to search a bit harder for the blue/black loom. But for now, it’s black.

 

[ecko04]

Any room left on the list Ecko04? I'm very interested! Great work!

You’ve been added to the list.

 

[ecko04]

There’s 1 spot left in the initial batch.