3.3TT WMI not activating .

[C Mandy]

Just installed a JB4 and WMI on my 2022 Stinger GT. On map7 with the phone app I can purge the system and the pump and solenoid work but when making passes at the track it isn't triggering. The FSB has a red light flashing not green. I wired in a light to the power wires on the pump, when I start the car it primes and the light glows. when I purge the system the light glows and the pump activates, When I do full throttle runs the light does not glow and the pump does not run. Any help would be appreciated. I have checked the 2 wire pins in the connector. They are seated. All grounds are good. I am at a loss and think maybe the FSB is faulty.

 

[Terry@BMS]

Email in a JB4 log to check your WMI page settings. Often those being wrong disable the meth flow.

 

[C Mandy]

Email in a JB4 log to check your WMI page settings. Often those being wrong disable the meth flow.

Who do I email to?

 

[Silverstinger2122]

SO weird scenerio, but I finally got my WMI kit working yesterday, when I enable bit7 the WMI flow it stays at 0 100% of the time, when I disable bit7 the WMI flow hits 100% as soon as PSI goes past 7 psi. My brother has a similar 2021 kia stinger GT AWD and his is oposite, gets WMI FLOW when bit7 is toggled on, and doesnt get it when its toggled off. Is there a reason for this functioning differently on 2 different cars?

 

[Troy Swanson]

Just installed a JB4 and WMI on my 2022 Stinger GT. On map7 with the phone app I can purge the system and the pump and solenoid work but when making passes at the track it isn't triggering. The FSB has a red light flashing not green. I wired in a light to the power wires on the pump, when I start the car it primes and the light glows. when I purge the system the light glows and the pump activates, When I do full throttle runs the light does not glow and the pump does not run. Any help would be appreciated. I have checked the 2 wire pins in the connector. They are seated. All grounds are good. I am at a loss and think maybe the FSB is faulty.

Mandy what did you find out?
I just started having the same issue.
After reviewing logs noticed WMI flow is zero.

Thank you

 

[Crazy-Stinger]

Mandy what did you find out?
I just started having the same issue.
After reviewing logs noticed WMI flow is zero.

Thank you

What brand of wmi did u have?

 

[C Mandy]

Mandy what did you find out?
I just started having the same issue.
After reviewing logs noticed WMI flow is zero.

Mandy what did you find out?
I just started having the same issue.
After reviewing logs noticed WMI flow is zero.

Thank you

Sorry about the late reply. I had to go into settings and toggle some of the options. I forget which ones but it finally started working. Email Terry and he should be able to steer you in the right direction.
Thank you

 

[C Mandy]

What brand of wmi did u have?

I bought the kit from Burger so it works in conjunction with the JB4.

 

[Terry@BMS]

Logs are required for any technical support. And I don't check this forum that often, so email them in.

 

[StingertimeNC]

Let us know what you guys find out, just so we can all learn more.