Where to Buy this Part?

[Lonz]

Hello,

Part of my front bumper got caught on a curb, and pulled my bumper good, and several of these screws shown above we pulled out and ruined. Can anyone tell me where I could buy some of these online? I asked professor Google several times, but couldn't find them...

Attached are some pics.

Thanks!

 

[cncBilly]

Most automotive stores will have a rack with several different types sold in packs of 6 or so. Otherwise the stealership should have them.

 

[eflyguy]

.. or get 50 for $5 on Amazon.

 

[MerlintheMad]

.. or get 50 for $5 on Amazon.

Okay. But which ones? Or does 8mm vs 10mm not matter?
Amazon.com: kia stinger front bumper clips: Automotive

 

[Lonz]

Awesome! Thanks guys! Any ideas how much a bumper cover would cost, and how hard it would be to replace myself? I was hoping to just sort of pop the crack back in place, but no such luck. Here's a pic.

 

[westcoastGT]

Awesome! Thanks guys! Any ideas how much a bumper cover would cost, and how hard it would be to replace myself? I was hoping to just sort of pop the crack back in place, but no such luck. Here's a pic.View attachment 37166

Thats not a DIY , it needs to be removed "welded" ( yes I know its plastic , but its a technique they call "welding to fix it ) then repaint , I would estimate 1000-1500 to fix ...............

 

[Lonz]

Thats not a DIY , it needs to be removed "welded" ( yes I know its plastic , but its a technique they call "welding to fix it ) then repaint , I would estimate 1000-1500 to fix ...............

Yikes! That's a lot! I was hoping to be under $1000. Ouch!

I found this link for removing the bumper:

3.3TT - Front Bumper Removal scared to do it, this should help!!

Doesn't sound too bad. I was thinking about removing the bumper, and somehow repairing the crack myself. Not exactly sure how I'd do that. Was hoping to put it back in place so how, and then use touch up paint to fill in the crack as much as possible...

 

[westcoastGT]

Yikes! That's a lot! I was hoping to be under $1000. Ouch!

............they need to remove the bumper cover , repair the crack , fill , sand ,prime , paint and clearcoat then reinstall , I had a small scratch on my rear bumper as I watched an old guy back into me , his insurance paid for it ...........$1300 ..........

 

[eflyguy]

Similar repair after being rear-ended in Sorento was close to $2000.

 

[MerlintheMad]

Well! Crap! I say try it yourself. What can you lose? Bumper covers are taken off by intrepid owners all the time and described on the forum. Reportedly it is "easy peasy". Hah. But you, @Lonz , seem ready to give it a try, so, go for it. Let us know. I'm sure that you will look into "plastic welding" and/or ask around to find out how that is done. If it doesn't work out, then get a pro.