Vintage K wheel cap over lay does not fit

[Goodie]

Just received vintage K wheel cap overlay from loden via the store on this site and they do not fit. I have the overlays on my counter in great lighting and the cap is wider than the opening can not get a good connection with 3m glue, quality of peice feels nice but who cares if it's too big.
Any suggestions out there.
To say the least I'm disappointed

 

[turboAWD]

Just received vintage K wheel cap overlay from loden via the store on this site and they do not fit. I have the overlays on my counter in great lighting and the cap is wider than the opening can not get a good connection with 3m glue, quality of peice feels nice but who cares if it's too big.
Any suggestions out there.
To say the least I'm disappointed

Which overlays are you referring to? Mine fit just fine - although I was supposed to use the "gasket" (the piece of sticky cardboard) and I didn't..

 

[Goodie]

Brand is loden, style is vintage K
When I lay over oem it is slightly too big, only the edges of the 3m glue makes contact and it's too big to fit within the grey plastic ring
Did u simply lay yours over the top and it worked? Or perhaps a better way to ask, what was your installation process step by step
Thank you for responding

 

[turboAWD]

I peeled off the tape, pushed them down, wiggled around a bit for best fit, and pushed down a bit more.. They were the easiest part of the whole install (I also did front / rear). I put up a couple of pics, if you search..

 

[Goodie]

Do You have 2019 stinger with 19" rims? I know there is also a 18" rim maybe the center caps are different sizes. I'm at a loss.
I thought this would be the easiest part as well I have the whole set, the steering wheel was easy, as it fit

 

[AV8R]

Toss them in the bin and buy the full centre caps. I had the stickers and they all peeled off.

 

[Goodie]

Not sure that is an option with vintage K style. I have seen the E badge as a full replacement.
What I have is not a vynal sticker, does not seem cheap, purchased from the store connected to this site, they are metal with 3m stick pad.
They simply were not made to fit a stinger cap, I am thinking a kia optima is what there made for and someone thought they would fit the stinger.
To make me happy I want my $ back or something else sent to me at no cost that actually fits, should be simple.

 

[turboAWD]

Do You have 2019 stinger with 19" rims? I know there is also a 18" rim maybe the center caps are different sizes. I'm at a loss.
I thought this would be the easiest part as well I have the whole set, the steering wheel was easy, as it fit

2019 GT1 19" wheels.

Contact Sal - he's VERY responsive. He offered to send me a replacement when I realized I messed up by not using the gaskets and the rear overlay came loose in a car wash.

It's possible they actually sent you the wrong ones - mine came without instructions, which isn't supposed to happen either. The quality seems good, but the quality control (sending instructions, sending the right size) seems a bit lacking..