Please check my log

[ldp82]

2023 Stinger with HKS plugs jb4 map 2 93 octane and intakes. Car felt a little sluggish up high decided to email the bot logs and have some ignition events. I don't really know what to look for so I'm hoping someone who can read this better than I can can interpret it for me. Thank you!

 

[Thomby]

It looks like you're logging manually, with a few short punches of the throttle and a thousand rows of noise (pedal at 0). Just use the automatic logging, should be set to 70/80% threshold by default, with a multi gear pull from say 20-30 up to 70-80.

That said, in your short WOT bursts, the 1.5 & 2.3 timing corrections aren't a huge deal, it's the 4.5 and 5s that suggest octane/heat limit.

Here's a more detailed post I made with examples of how I read the logs: Wondering if anyone could let me know if I am running at a safe level I have no idea. What my air fuel ratio should be. Please help someone.

 

[ldp82]

It looks like you're logging manually, with a few short punches of the throttle and a thousand rows of noise (pedal at 0). Just use the automatic logging, should be set to 70/80% threshold by default, with a multi gear pull from say 20-30 up to 70-80.

That said, in your short WOT bursts, the 1.5 & 2.3 timing corrections aren't a huge deal, it's the 4.5 and 5s that suggest octane/heat limit.

Here's a more detailed post I made with examples of how I read the logs: Wondering if anyone could let me know if I am running at a safe level I have no idea. What my air fuel ratio should be. Please help someone.

Thank you. I emailed the bot some autologs and it still had the noise. To make sure I captured the data I started the logging manually.

 

[Thomby]

Thank you. I emailed the bot some autologs and it still had the noise. To make sure I captured the data I started the logging manually.

What do you mean by "emailed the bot"? If you hit Settings, App Settings (under Everything Else), Logging Settings, the first two settings should be WOT timeout (3 seconds) and WOT threshold (70% is fine).

Then just floor it through a couple of full gears, and under Logs tap it and hit Email. It should start where you go WOT and end shortly after you let off.

 

[ldp82]

What do you mean by "emailed the bot"? If you hit Settings, App Settings (under Everything Else), Logging Settings, the first two settings should be WOT timeout (3 seconds) and WOT threshold (70% is fine).

Then just floor it through a couple of full gears, and under Logs tap it and hit Email. It should start where you go WOT and end shortly after you let off.

One of the guys made a bot that interprets your logs, you can email it @ Map6tuning@gmail.com

 

[cLaw]

Just like Thomby said, you'll ideally want a log with your pedal at 100 (WOT/Wide open throttle) and you going through a couple of gears. Whenever I need to check my logs or log I usually get on the highway and go from 40-90/100 through a couple gears and then get off the highway and pull over to check the log. I've never heard of that bot so i'm really not too sure of its capabilities but you can always post here and people will help

 

[Thomby]

Never heard of it here either but will give it a try. Still recommend trying the JB4's automatic throttle threshold log...if you post here we can take a look, and there's always jb4tech to hear from the BMS guys.

 

[BUCHANAN2009]

Hey fellow stingers!!! Have a log here and to me it looks like I have some power left somewhere. The timing indicates I can go up a map??

 

[Thomby]

That's how it looks -- ign1 looks healthy and 2-5 show no individual cylinder timing corrections. What fuel are you running?

 

[BUCHANAN2009]

That's how it looks -- ign1 looks healthy and 2-5 show no individual cylinder timing corrections. What fuel are you running?

5gal of e85 and topped off with 93. Amazingly these are re gapped factory plugs also.