For Sale NorCal Sold Stinger Parts for Sale

[Tonys_GT1]

Sold my 2022 after 3 months of owning it to upgrade to a GT500. I have a few parts that I won't be needing anymore.

Borla Exhaust, used maybe 500 miles. Has tip extensions but I can remove those if you don't have a 2022 - $800

19" Stance SF07 Bronze with Sumitomo Tires and Kia TPMS used for maybe 200 miles. Custom made for the Stinger with no curb rash or chips even. Paid over $2400, asking $1800.

RWD all weather floor mats and trunk mat only driver one is dirty but I'll clean it - $100

Gold Shield 5L car cover, used a few times but in good condition - $80

Let me know if you have any questions. I'm in Sacramento and would prefer local pickup because shipping is a hassle.

 

[Snowwhite]

can you provide a little more details on the wheels? widths, offsets, and the tire sizes on them?

 

[Tonys_GT1]

can you provide a little more details on the wheels? widths, offsets, and the tire sizes on them?

Sorry, I should have done that.

Stance SF07 Dual Brushed Bronze
19x8.5 +32
5x114.3
67.1mm bore
12X1.5 Splined lug nuts (either black or chrome because I have both)
235/40R19 Sumitomo HTR A/S (not good for track use but for a daily driver)

 

[kingk33mie]

Interested in mats and cargo liner if you can ship to 79938 email kidk33mie@gmail.com

 

[Tonys_GT1]

S

Interested in mats and cargo liner if you can ship to 79938 email kidk33mie@gmail.com

Shipping for the mats won't be too bad but the cargo liner would be a pretty big box, I'm guessing around $40-$50 to ship, but I would have to double check. Give me a week or so to see if someone local wants them. In the meantime, I'll look for a box that would fit everything because I bought the cargo liner from a dealer and I don't remember getting a box.

 

[kingk33mie]

S

Shipping for the mats won't be too bad but the cargo liner would be a pretty big box, I'm guessing around $40-$50 to ship, but I would have to double check. Give me a week or so to see if someone local wants them. In the meantime, I'll look for a box that would fit everything because I bought the cargo liner from a dealer and I don't remember getting a box.

just keep me posted

 

[20Stinger19]

What year is the GT500 and did you sell or trade the Stinger.....if you don't mind me asking. Thanks.

 

[General_Vodka]

Hey what a small world. Sacramento also, citrus heights area. where have been driving man, I don't think I saw your car before... Or maybe I did and simply forgot about it...I'm a derp
Anyways I would totally take that borla off your hands.. except I have one already.
What material are the wheels? Are they lighter than stock? How strong are they? If I'm going to purchase wheels I would prefer them to be a performance upgrade and not just aesthetics. Rotary forged wheels generally are stronger and better than cast. Not a big wheel guy, have pretty much always run stock wheels.
Also the offsets are the same for front and back? How is the clearance in the front since I know the front has a lot less room than the back.

Sorry, I should have done that.

Stance SF07 Dual Brushed Bronze
19x8.5 +32
5x114.3
67.1mm bore
12X1.5 Splined lug nuts (either black or chrome because I have both)
235/40R19 Sumitomo HTR A/S (not good for track use but for a daily driver)

 

[Tonys_GT1]

What year is the GT500 and did you sell or trade the Stinger.....if you don't mind me asking. Thanks.

2021, bought it brand new. Funny how brand new is a previous year lol I traded it in because I was able to get some tax savings by doing some crazy deal in California. It ended up being a $42k down payment.

 

[Tonys_GT1]

Hey what a small world. Sacramento also, citrus heights area. where have been driving man, I don't think I saw your car before... Or maybe I did and simply forgot about it...I'm a derp
Anyways I would totally take that borla off your hands.. except I have one already.
What material are the wheels? Are they lighter than stock? How strong are they? If I'm going to purchase wheels I would prefer them to be a performance upgrade and not just aesthetics. Rotary forged wheels generally are stronger and better than cast. Not a big wheel guy, have pretty much always run stock wheels.
Also the offsets are the same for front and back? How is the clearance in the front since I know the front has a lot less room than the back.

Hey what a small world. Sacramento also, citrus heights area. where have been driving man, I don't think I saw your car before... Or maybe I did and simply forgot about it...I'm a derp
Anyways I would totally take that borla off your hands.. except I have one already.
What material are the wheels? Are they lighter than stock? How strong are they? If I'm going to purchase wheels I would prefer them to be a performance upgrade and not just aesthetics. Rotary forged wheels generally are stronger and better than cast. Not a big wheel guy, have pretty much always run stock wheels.
Also the offsets are the same for front and back? How is the clearance in the front since I know the front has a lot less room than the back.

I drive from West Sacramento to Rocklin so I was always going through Citrus Heights. I bought them to save weight because I was told the stock wheels were like 32 lbs (not including tires). Unfortunately, I never got around to weighing the stock setup because I just packaged them and put them in storage. This says they are 21 lbs each, which was a substantial weight savings for me. These were made specifically for Stingers so there is no clearance issues, even with the bigger brembo brakes for the GTs. Not sure on the strength rating, I would have to call. These were done to be flush and yes, the backs are the same offset and they look flush as well. The only different you have in offset is with a wider wheel because the centerline becomes different. The front is where you run into issues with wider wheels but these are barely wider than stock in the front.

 

[AA95101]

sent pm

 

[20Stinger19]

2021, bought it brand new. Funny how brand new is a previous year lol I traded it in because I was able to get some tax savings by doing some crazy deal in California. It ended up being a $42k down payment.

2021 Gt500! What color????

ive been searching for a 13-14 GT500 but market is so dam nuts right now

 

[Tonys_GT1]

2021 Gt500! What color????

ive been searching for a 13-14 GT500 but market is so dam nuts right now

Yeah, prices are crazy, which is why I need to sell these parts lol Rapid Red.

 

[laminatedpain]

Out of curiosity, how well did the Borla fit on the 2022? Just ordered one myself and was concerned about the orientation of the new OEM fake tips on this model year.

 

[Tonys_GT1]

Out of curiosity, how well did the Borla fit on the 2022? Just ordered one myself and was concerned about the orientation of the new OEM fake tips on this model year.

It will install fine but you will have issues with the tips and additional cabin noise from them being too short. I had to add extensions and some vibration resistant pieces to make it sound right. Here is the alignment and you can see why it would rattle against the fake tips. The other pic shows the rubber isolators I put on there to help with the rattle. It was mainly to test it out, though. It sounded good after that.

 

[laminatedpain]

It will install fine but you will have issues with the tips and additional cabin noise from them being too short. I had to add extensions and some vibration resistant pieces to make it sound right. Here is the alignment and you can see why it would rattle against the fake tips. The other pic shows the rubber isolators I put on there to help with the rattle. It was mainly to test it out, though. It sounded good after that.

Thanks for the info! Would you be able to link me to the additional pieces you installed?

 

[Tonys_GT1]

Thanks for the info! Would you be able to link me to the additional pieces you installed?

I just ordered (2) 12" pieces of 2.25" OD 304 stainless tubing but it should be tack welded with the correct wire for stainless. The rubber was just something I got from a friend that had it from a side project. The exhaust will work fine without any modifications but you'll just have increased cabin noise. I would try it as-is first then decide what you want to do, because it can all be done post installation.

 

[Surge]

Are mats still available?

 

[Tonys_GT1]

Are mats still available?

Yes

 

[Surge]

Would you meet by vacaville if not davis? Interested but driving a bit of a way