For Sale MBRP S4704304 Pro Series 2.5" Cat-Back Exhaust System

[MasterWitsec]

For sale is an MBRP S4704304 – Pro Series 2.5” Cat-Back exhaust system for a Kia Stinger GT AWD. This is the T-304 stainless steel variant which has superior corrosion performance to the $1,202.87 CAD including tax “Aluminized” version (S4704AL) MBRP also manufacture for the Stinger GT.

The exhaust was mounted and used for approximately 4 months but I’ve found another car I'm replacing the Stinger with, so I am returning it to original condition with the original exhaust. It has a nice throaty tone to the exhaust sound and sounds similar to a Nissan GTR under acceleration. It has minimal drone under load and I would recommend it to someone looking to unleash more sound from their Stinger. There is no corrosion on the stainless exhaust and it is in as new condition other than general road grime from being installed and used.

The MSRP including tax for the exhaust I have for sale is $1,679.99 CAD, but they can be found online for $1,399.99 including tax. Posted for sale at $975.00. Local pickup is preferred (Upper Mission, Kelowna, British Columbia, Canada), but can ship anywhere at buyers expense.

 

[timfully]

To bad I’m in the lower mainland I just purchased this exhaust last week online , do you have any other goodies you are looking to sell?

 

[MasterWitsec]

Price reduced to $875 CAD (~$690 USD) excluding shipping.

 

[Antoxa]

Price reduced to $875 CAD (~$690 USD) excluding shipping.

Any idea on shipping cost to Toronto?
Do you have secondary cats / DP for sale by chance?
Why are you selling?

 

[MasterWitsec]

Any idea on shipping cost to Toronto?
Do you have secondary cats / DP for sale by chance?
Why are you selling?

Hi. The following shipping rates are the cheapest estimates to a random postal code in Toronto based on the original shipping dimensions: If we agree on a rate (UPS), and I get to the shippers and they try to charge me significantly more, I can call you and see what you'd like to do.
Purolator: $335.22
UPS: $154.52
FedEx: $220.09

I no longer have any additional parts for sale. I have a set of oval aftermarket exhaust tips currently on the exhaust that I can throw in with the exhaust. This is an additional $200 value.

I'm selling all the aftermarket parts I had for my Stinger to return the car to stock for a sale. Let me know what you'd like to do.

 

[Antoxa]

Could you do me a favour. I am looking to install this exhaust on my Genesis G80 3.3 sport. This will require medications. But most importantly I need to check the muffler area spacing. Could you please confirm the dimensions of the muffler and resonator assembly? The length, height, width and overall diameter of the entire muffler area accessembly?

 

[MasterWitsec]

Could you do me a favour. I am looking to install this exhaust on my Genesis G80 3.3 sport. This will require medications. But most importantly I need to check the muffler area spacing. Could you please confirm the dimensions of the muffler and resonator assembly? The length, height, width and overall diameter of the entire muffler area accessembly?

I'll get the exhaust out of the box and get those measurements tonight. I'll PM you when I have them.

 

[ddft1949]

How much shipping to Utah, USA?

 

[MasterWitsec]

How much shipping to Utah, USA?

I'll PM you a shipping cost. Do you have a postal code I should use?

 

[ddft1949]

84097

 

[cncBilly]

For sale is an MBRP S4704304 – Pro Series 2.5” Cat-Back exhaust system for a Kia Stinger GT AWD. This is the T-304 stainless steel variant which has superior corrosion performance to the $1,202.87 CAD including tax “Aluminized” version (S4704AL) MBRP also manufacture for the Stinger GT.

The exhaust was mounted and used for approximately 4 months but I’ve found another car I'm replacing the Stinger with, so I am returning it to original condition with the original exhaust. It has a nice throaty tone to the exhaust sound and sounds similar to a Nissan GTR under acceleration. It has minimal drone under load and I would recommend it to someone looking to unleash more sound from their Stinger. There is no corrosion on the stainless exhaust and it is in as new condition other than general road grime from being installed and used.

The MSRP including tax for the exhaust I have for sale is $1,679.99 CAD, but they can be found online for $1,399.99 including tax. Posted for sale at $975.00. Local pickup is preferred (Upper Mission, Kelowna, British Columbia, Canada), but can ship anywhere at buyers expense.

Can’t believe you haven’t had one of our Vancouver area Stinger Wingers jump on this. Wake-up boyz

 

[MasterWitsec]

84097

UPS is quoting $150 USD for shipment to your postal code.

 

[Aquay]

How much is shipping to postal code 85396?

 

[MasterWitsec]

How much is shipping to postal code 85396?

UPS is quoting $175 USD for shipment to your postal code. You'd be $867 USD all in.

 

[Ric 'Ochet]

Hi. The following shipping rates are the cheapest estimates to a random postal code in Toronto based on the original shipping dimensions: If we agree on a rate (UPS), and I get to the shippers and they try to charge me significantly more, I can call you and see what you'd like to do.
Purolator: $335.22
UPS: $154.52
FedEx: $220.09

I no longer have any additional parts for sale. I have a set of oval aftermarket exhaust tips currently on the exhaust that I can throw in with the exhaust. This is an additional $200 value.

I'm selling all the aftermarket parts I had for my Stinger to return the car to stock for a sale. Let me know what you'd like to do.

Did you sell? What tips are they?

 

[MasterWitsec]

Did you sell? What tips are they?

There are several interested parties, but the exhaust is still available. The tips I have are oval carbon fiber tips bought online. They were $250 for the set.

 

[Ric 'Ochet]

There are several interested parties, but the exhaust is still available. The tips I have are oval carbon fiber tips bought online. They were $250 for the set.

Want to split and ship the tips? How much would you take?

 

[MasterWitsec]

Want to split and ship the tips? How much would you take?

They're slightly scratched where they were mounted to the exhaust and around the facia, but I'd part them out for $100 CAD if you'd like them.

 

[Ric 'Ochet]

They're slightly scratched where they were mounted to the exhaust and around the facia, but I'd part them out for $100 CAD if you'd like them.

Plus shipping of course - can you shoot a couple pics of the tips and scratches? If it's hidden I'm okay with it honestly. You can email me at ricoshay7@gmail.com to work out details.

I just bought the exact same exhaust and assume they should fit without a problem. Had I seen this a day sooner would have worked a deal with you on the whole thing.

 

[MasterWitsec]

Plus shipping of course - can you shoot a couple pics of the tips and scratches? If it's hidden I'm okay with it honestly. You can email me at ricoshay7@gmail.com to work out details.

I just bought the exact same exhaust and assume they should fit without a problem. Had I seen this a day sooner would have worked a deal with you on the whole thing.

I'll email some pictures of the tips to you tonight. It's worth mentioning they require a small amount of trimming around the exhaust facia to fit without issue.