Wanted Exhaust tips

[ddft1949]

Looking for exhaust tips for my MBRP exhaust. Don't want to wait forever for shipping.

 

[AYip31]

Looking for exhaust tips for my MBRP exhaust. Don't want to wait forever for shipping.

It’s didn’t really take that long from Asia using ailexpress, maybe 3 weeks

 

[ddft1949]

It’s didn’t really take that long from Asia using ailexpress, maybe 3 weeks

Actually last I checked on ali, I think their "Akrapovic" tips have been removed.

 

[AYip31]

Actually last I checked on ali, I think their "Akrapovic" tips have been removed.

I went with the stainless steel stock look.

https://m.aliexpress.com/item/10000...er_id=0706731bb97f401684f0c8086b780194&is_c=Y

 

[ddft1949]

I went with the stainless steel stock look.

https://m.aliexpress.com/item/10000...er_id=0706731bb97f401684f0c8086b780194&is_c=Y

Do I need to ramp up the car and take off the exhaust to install the tips?

 

[AYip31]

Do I need to ramp up the car and take off the exhaust to install the tips?

You might need to, to take the stock fake ones off
Are you going round or oval?

 

[ddft1949]

You might need to, to take the stock fake ones off
Are you going round or oval?

Whichever is the easiest. Probably oval though. The MBRP exhaust sounded even louder than I expected and at 2k rpm, there is a little drone.

 

[AYip31]

Whichever is the easiest. Probably oval though. The MBRP exhaust sounded even louder than I expected and at 2k rpm, there is a little drone.

Tips would help with the drone
Oval, no need to trim the bumper
Round, you would need to trim

 

[AYip31]

.

 

[Oglar100]

Whichever is the easiest. Probably oval though. The MBRP exhaust sounded even louder than I expected and at 2k rpm, there is a little drone.

You can sometimes find them on Amazon also

 

[StingerJefferson]

Anyone got a link for the Amazon version?

 

[Blueangel]

I have the akrapovic round from AliExpress and stainless oval for MBRP. Will sell one set, haven’t decided which. Will keep y’all posted.

 

[ddft1949]

I have the akrapovic round from AliExpress and stainless oval for MBRP. Will sell one set, haven’t decided which. Will keep y’all posted.

Lmk thanks!

 

[Will I Am]

AYip31 - do you have a photo looking directly at the exhaust from the back? I am wanting to do the ovals as well. I am like ddft1949 - don't want to wait 3 or more weeks for shipping. Would love to find someone in the U.S. with those stainless ovals. I want to keep the "stock" look. Anyone with a link to anything else, like Amazon? Thanks!

 

[AYip31]

AYip31 - do you have a photo looking directly at the exhaust from the back? I am wanting to do the ovals as well. I am like ddft1949 - don't want to wait 3 or more weeks for shipping. Would love to find someone in the U.S. with those stainless ovals. I want to keep the "stock" look. Anyone with a link to anything else, like Amazon? Thanks!

 

[Oglar100]

If I remember correctly Circle tips you need to cut some of the rear diffuser and ovals you do not. As far as what fits is going to depend on your exhaust. Thats a place to start but you need to make sure it will fit your exhaust 65mm ID tips should fig a 2.5 inc OD exhaust. I had to "rig" mine up a little though.


https://www.amazon.com/Carbon-Stain...dp/B078GN5L9X/ref=psdc_15727001_t2_B07QT7QWMW

 

[Will I Am]

If I remember correctly Circle tips you need to cut some of the rear diffuser and ovals you do not. As far as what fits is going to depend on your exhaust. Thats a place to start but you need to make sure it will fit your exhaust 65mm ID tips should fig a 2.5 inc OD exhaust. I had to "rig" mine up a little though.

https://www.amazon.com/Carbon-Stainless-Exhaust-Muffler-outlet/dp/B078GN5L9X/ref=psdc_15727001_t2_B07QT7QWMW

I don't want to cut, so the ovals are it and they to be the old "needle in the haystack" search. Using MBRP exhaust. The blue should look good on the Blue Stinger.
AYip31 - thanks for the photos!

 

[Schroedes]

I went with the stainless steel stock look.

https://m.aliexpress.com/item/10000...er_id=0706731bb97f401684f0c8086b780194&is_c=Y

Those oval tips installed on stainless exhaust with no trimming??

 

[AYip31]

Those oval tips installed on stainless exhaust with no trimming??

Correct, bolted directly onto the mbrp exhaust

 

[Schroedes]

Correct, bolted directly onto the mbrp exhaust

Awesome. Thank you. Just ordered my SS mbrp